Setup Ethernet interface to bee used by iscsi with targetcli
Clash Royale CLAN TAG#URR8PPP up vote
0
down vote
favorite
I am trying to create a iscsi device but I am stuck on how to assign a Ethernet interface to the device.
I got an Ethernet adapter available to be used.
I don't know how to move on.
o- / ........................................... [...]
o- backstores ................................ [...]
| o- block ................................... [Storage Objects: 1]
| | o- disk................................... [/dev/sdb1 (1.8TiB) write-thru activated]
| o- fileio .................................. [Storage Objects: 0]
| o- pscsi ................................... [Storage Objects: 0]
| o- ramdisk ................................. [Storage Objects: 0]
o- iscsi ..................................... [Targets: 1]
| o- iqn.2018-02.host2.home:server ........... [TPGs: 1]
| o- tpg1 .................................. [no-gen-acls, no-auth]
| o- acls ................................ [ACLs: 1]
| | o- iqn.2018-02.host2.home:client ..... [Mapped LUNs: 1]
| | o- mapped_lun0 ..................... [lun0 block/disk (rw)]
| o- luns ................................ [LUNs: 1]
| | o- lun0 .............................. [block/disk (/dev/sdb1)]
| o- portals ............................. [Portals: 0]
o- loopback .................................. [Targets: 0]
o- vhost ..................................... [Targets: 0]
networking server virtualization iscsi
edited Feb 15 at 9:03
Jenna Sloan
1033
asked Feb 13 at 16:22
Rikard Svenningsen
12
add a comment |Â
up vote
0
down vote
favorite
I am trying to create a iscsi device but I am stuck on how to assign a Ethernet interface to the device.
I got an Ethernet adapter available to be used.
I don't know how to move on.
o- / ........................................... [...]
o- backstores ................................ [...]
| o- block ................................... [Storage Objects: 1]
| | o- disk................................... [/dev/sdb1 (1.8TiB) write-thru activated]
| o- fileio .................................. [Storage Objects: 0]
| o- pscsi ................................... [Storage Objects: 0]
| o- ramdisk ................................. [Storage Objects: 0]
o- iscsi ..................................... [Targets: 1]
| o- iqn.2018-02.host2.home:server ........... [TPGs: 1]
| o- tpg1 .................................. [no-gen-acls, no-auth]
| o- acls ................................ [ACLs: 1]
| | o- iqn.2018-02.host2.home:client ..... [Mapped LUNs: 1]
| | o- mapped_lun0 ..................... [lun0 block/disk (rw)]
| o- luns ................................ [LUNs: 1]
| | o- lun0 .............................. [block/disk (/dev/sdb1)]
| o- portals ............................. [Portals: 0]
o- loopback .................................. [Targets: 0]
o- vhost ..................................... [Targets: 0]
networking server virtualization iscsi
edited Feb 15 at 9:03
Jenna Sloan
1033
asked Feb 13 at 16:22
Rikard Svenningsen
12
Please edit your question with the new content, and delete your comments above.
– vidarlo
Feb 14 at 17:39
I have move on by watching this video: youtube.com/watch?v=elWYb2n5dLA
– Rikard Svenningsen
Feb 17 at 12:46
add a comment |Â
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I am trying to create a iscsi device but I am stuck on how to assign a Ethernet interface to the device.
I got an Ethernet adapter available to be used.
I don't know how to move on.
o- / ........................................... [...]
o- backstores ................................ [...]
| o- block ................................... [Storage Objects: 1]
| | o- disk................................... [/dev/sdb1 (1.8TiB) write-thru activated]
| o- fileio .................................. [Storage Objects: 0]
| o- pscsi ................................... [Storage Objects: 0]
| o- ramdisk ................................. [Storage Objects: 0]
o- iscsi ..................................... [Targets: 1]
| o- iqn.2018-02.host2.home:server ........... [TPGs: 1]
| o- tpg1 .................................. [no-gen-acls, no-auth]
| o- acls ................................ [ACLs: 1]
| | o- iqn.2018-02.host2.home:client ..... [Mapped LUNs: 1]
| | o- mapped_lun0 ..................... [lun0 block/disk (rw)]
| o- luns ................................ [LUNs: 1]
| | o- lun0 .............................. [block/disk (/dev/sdb1)]
| o- portals ............................. [Portals: 0]
o- loopback .................................. [Targets: 0]
o- vhost ..................................... [Targets: 0]
networking server virtualization iscsi
edited Feb 15 at 9:03
Jenna Sloan
1033
asked Feb 13 at 16:22
Rikard Svenningsen
12
I am trying to create a iscsi device but I am stuck on how to assign a Ethernet interface to the device.
I got an Ethernet adapter available to be used.
I don't know how to move on.
o- / ........................................... [...]
o- backstores ................................ [...]
| o- block ................................... [Storage Objects: 1]
| | o- disk................................... [/dev/sdb1 (1.8TiB) write-thru activated]
| o- fileio .................................. [Storage Objects: 0]
| o- pscsi ................................... [Storage Objects: 0]
| o- ramdisk ................................. [Storage Objects: 0]
o- iscsi ..................................... [Targets: 1]
| o- iqn.2018-02.host2.home:server ........... [TPGs: 1]
| o- tpg1 .................................. [no-gen-acls, no-auth]
| o- acls ................................ [ACLs: 1]
| | o- iqn.2018-02.host2.home:client ..... [Mapped LUNs: 1]
| | o- mapped_lun0 ..................... [lun0 block/disk (rw)]
| o- luns ................................ [LUNs: 1]
| | o- lun0 .............................. [block/disk (/dev/sdb1)]
| o- portals ............................. [Portals: 0]
o- loopback .................................. [Targets: 0]
o- vhost ..................................... [Targets: 0]
networking server virtualization iscsi
networking server virtualization iscsi
edited Feb 15 at 9:03
Jenna Sloan
1033
asked Feb 13 at 16:22
Rikard Svenningsen
12
edited Feb 15 at 9:03
Jenna Sloan
1033
asked Feb 13 at 16:22
Rikard Svenningsen
12
edited Feb 15 at 9:03
Jenna Sloan
1033
edited Feb 15 at 9:03
Jenna Sloan
1033
edited Feb 15 at 9:03
Jenna Sloan
1033
1033
asked Feb 13 at 16:22
Rikard Svenningsen
12
asked Feb 13 at 16:22
Rikard Svenningsen
12
asked Feb 13 at 16:22
Rikard Svenningsen
12
12
Please edit your question with the new content, and delete your comments above.
– vidarlo
Feb 14 at 17:39
I have move on by watching this video: youtube.com/watch?v=elWYb2n5dLA
– Rikard Svenningsen
Feb 17 at 12:46
add a comment |Â
Please edit your question with the new content, and delete your comments above.
– vidarlo
Feb 14 at 17:39
I have move on by watching this video: youtube.com/watch?v=elWYb2n5dLA
– Rikard Svenningsen
Feb 17 at 12:46
Please edit your question with the new content, and delete your comments above.
– vidarlo
Feb 14 at 17:39
Please edit your question with the new content, and delete your comments above.
– vidarlo
Feb 14 at 17:39
I have move on by watching this video: youtube.com/watch?v=elWYb2n5dLA
– Rikard Svenningsen
Feb 17 at 12:46
I have move on by watching this video: youtube.com/watch?v=elWYb2n5dLA
– Rikard Svenningsen
Feb 17 at 12:46
add a comment |Â
active
oldest
votes
active
oldest
votes
active
oldest
votes
active
oldest
votes
active
oldest
votes
Â
draft saved
draft discarded
Â
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1005859%2fsetup-ethernet-interface-to-bee-used-by-iscsi-with-targetcli%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Please edit your question with the new content, and delete your comments above.
– vidarlo
Feb 14 at 17:39
I have move on by watching this video: youtube.com/watch?v=elWYb2n5dLA
– Rikard Svenningsen
Feb 17 at 12:46