Suspected failed WD USB HDD shows in lsusb but not in lsblk. How can I get it to present as block level device?

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP








up vote
1
down vote

favorite












A friend of mine recently had a WD USB HDD stop mounting in Windows. I reproduced the issue in my Windows workstation, and plugged the drive in to a Lubuntu 16.04 PC that I use with other USB 3.0 HDDs.
All I want to to is get the device to present itself as a block level device so I can get a raw disk image and work on recovering data from there out.



Syslog shows the device being connected, and the device appears under lsusb



 Bus 002 Device 005: ID 1058:25e2 Western Digital Technologies, Inc.


and here is the relevant part of syslog: 



Apr 19 12:35:22 safe5 kernel: [ 9485.583924] sd 6:0:0:0: [sdb] Attached SCSI disk
Apr 19 12:35:23 safe5 kernel: [ 9486.939647] usb 2-7: new SuperSpeed USB device number 5 using xhci_hcd
Apr 19 12:35:23 safe5 kernel: [ 9486.960693] usb 2-7: New USB device found, idVendor=1058, idProduct=25e2
Apr 19 12:35:23 safe5 kernel: [ 9486.960698] usb 2-7: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Apr 19 12:35:23 safe5 kernel: [ 9486.960701] usb 2-7: Product: My Passport 25E2
Apr 19 12:35:23 safe5 kernel: [ 9486.960704] usb 2-7: Manufacturer: Western Digital
Apr 19 12:35:23 safe5 kernel: [ 9486.960706] usb 2-7: SerialNumber: 575837314431374E33335230
Apr 19 12:35:23 safe5 kernel: [ 9486.961519] usb-storage 2-7:1.0: USB Mass Storage device detected
Apr 19 12:35:23 safe5 kernel: [ 9486.961653] scsi host6: usb-storage 2-7:1.0
Apr 19 12:35:23 safe5 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7"
Apr 19 12:35:23 safe5 mtp-probe: bus: 2, device: 5 was not an MTP device
Apr 19 12:35:24 safe5 kernel: [ 9487.976221] scsi 6:0:0:0: Direct-Access WD My Passport 25E2 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9487.976545] scsi 6:0:0:1: CD-ROM WD Virtual CD 25E2 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9488.028070] scsi 6:0:0:2: Enclosure WD SES Device 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9488.064204] sd 6:0:0:0: Attached scsi generic sg1 type 0
Apr 19 12:35:24 safe5 kernel: [ 9488.065447] sd 6:0:0:0: [sdb] Spinning up disk...
Apr 19 12:35:24 safe5 kernel: [ 9488.065613] sr 6:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
Apr 19 12:35:24 safe5 kernel: [ 9488.065846] sr 6:0:0:1: Attached scsi CD-ROM sr0
Apr 19 12:35:24 safe5 kernel: [ 9488.065971] sr 6:0:0:1: Attached scsi generic sg3 type 5
Apr 19 12:35:24 safe5 kernel: [ 9488.066123] ses 6:0:0:2: Attached Enclosure device
Apr 19 12:35:24 safe5 kernel: [ 9488.066219] ses 6:0:0:2: Attached scsi generic sg4 type 13
Apr 19 12:35:24 safe5 kernel: [ 9488.067679] ses 6:0:0:2: Wrong diagnostic page; asked for 1 got 8
Apr 19 12:35:24 safe5 kernel: [ 9488.067687] ses 6:0:0:2: Failed to get diagnostic page 0xffffffea
Apr 19 12:35:24 safe5 kernel: [ 9488.067692] ses 6:0:0:2: Failed to bind enclosure -19
Apr 19 12:35:26 safe5 com.canonical.indicator.application[1873]: (process:2050): indicator-application-service-WARNING **: Application already exists, re-req
uesting properties.
Apr 19 12:35:32 safe5 kernel: [ 9489.095572] .
Apr 19 12:35:34 safe5 kernel: [ 9496.007435] .
Apr 19 12:35:36 safe5 kernel: [ 9497.959602] .
Apr 19 12:35:38 safe5 kernel: [ 9499.911580] .
Apr 19 12:35:40 safe5 kernel: [ 9501.863560] .
Apr 19 12:35:42 safe5 kernel: [ 9503.815526] .
Apr 19 12:35:44 safe5 kernel: [ 9505.767521] .
Apr 19 12:35:46 safe5 kernel: [ 9507.719493] .
Apr 19 12:35:48 safe5 kernel: [ 9509.639304] .
Apr 19 12:35:50 safe5 kernel: [ 9511.591293] .
Apr 19 12:35:52 safe5 kernel: [ 9513.543421] .
Apr 19 12:35:54 safe5 kernel: [ 9515.495397] .
Apr 19 12:35:56 safe5 kernel: [ 9517.447378] .
Apr 19 12:35:58 safe5 kernel: [ 9519.399161] .
Apr 19 12:36:00 safe5 kernel: [ 9521.351332] .
Apr 19 12:36:02 safe5 kernel: [ 9523.303313] .
Apr 19 12:36:04 safe5 kernel: [ 9525.255294] .
Apr 19 12:36:06 safe5 kernel: [ 9527.207060] .
Apr 19 12:36:06 safe5 kernel: [ 9529.159242] .
Apr 19 12:36:06 safe5 kernel: [ 9529.279307] xhci_hcd 0000:00:14.0: Cannot set link state.
Apr 19 12:36:06 safe5 kernel: [ 9529.279317] usb usb2-port7: cannot disable (err = -32)



16.04 data-recovery




share|improve this question




















  • See if you can chkdsk d: /f on it in Windows. Change the d: to the appropriate drive designator.
    – heynnema
    Apr 19 at 18:40














up vote
1
down vote

favorite












A friend of mine recently had a WD USB HDD stop mounting in Windows. I reproduced the issue in my Windows workstation, and plugged the drive in to a Lubuntu 16.04 PC that I use with other USB 3.0 HDDs.
All I want to to is get the device to present itself as a block level device so I can get a raw disk image and work on recovering data from there out.



Syslog shows the device being connected, and the device appears under lsusb



 Bus 002 Device 005: ID 1058:25e2 Western Digital Technologies, Inc.


and here is the relevant part of syslog: 



Apr 19 12:35:22 safe5 kernel: [ 9485.583924] sd 6:0:0:0: [sdb] Attached SCSI disk
Apr 19 12:35:23 safe5 kernel: [ 9486.939647] usb 2-7: new SuperSpeed USB device number 5 using xhci_hcd
Apr 19 12:35:23 safe5 kernel: [ 9486.960693] usb 2-7: New USB device found, idVendor=1058, idProduct=25e2
Apr 19 12:35:23 safe5 kernel: [ 9486.960698] usb 2-7: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Apr 19 12:35:23 safe5 kernel: [ 9486.960701] usb 2-7: Product: My Passport 25E2
Apr 19 12:35:23 safe5 kernel: [ 9486.960704] usb 2-7: Manufacturer: Western Digital
Apr 19 12:35:23 safe5 kernel: [ 9486.960706] usb 2-7: SerialNumber: 575837314431374E33335230
Apr 19 12:35:23 safe5 kernel: [ 9486.961519] usb-storage 2-7:1.0: USB Mass Storage device detected
Apr 19 12:35:23 safe5 kernel: [ 9486.961653] scsi host6: usb-storage 2-7:1.0
Apr 19 12:35:23 safe5 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7"
Apr 19 12:35:23 safe5 mtp-probe: bus: 2, device: 5 was not an MTP device
Apr 19 12:35:24 safe5 kernel: [ 9487.976221] scsi 6:0:0:0: Direct-Access WD My Passport 25E2 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9487.976545] scsi 6:0:0:1: CD-ROM WD Virtual CD 25E2 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9488.028070] scsi 6:0:0:2: Enclosure WD SES Device 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9488.064204] sd 6:0:0:0: Attached scsi generic sg1 type 0
Apr 19 12:35:24 safe5 kernel: [ 9488.065447] sd 6:0:0:0: [sdb] Spinning up disk...
Apr 19 12:35:24 safe5 kernel: [ 9488.065613] sr 6:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
Apr 19 12:35:24 safe5 kernel: [ 9488.065846] sr 6:0:0:1: Attached scsi CD-ROM sr0
Apr 19 12:35:24 safe5 kernel: [ 9488.065971] sr 6:0:0:1: Attached scsi generic sg3 type 5
Apr 19 12:35:24 safe5 kernel: [ 9488.066123] ses 6:0:0:2: Attached Enclosure device
Apr 19 12:35:24 safe5 kernel: [ 9488.066219] ses 6:0:0:2: Attached scsi generic sg4 type 13
Apr 19 12:35:24 safe5 kernel: [ 9488.067679] ses 6:0:0:2: Wrong diagnostic page; asked for 1 got 8
Apr 19 12:35:24 safe5 kernel: [ 9488.067687] ses 6:0:0:2: Failed to get diagnostic page 0xffffffea
Apr 19 12:35:24 safe5 kernel: [ 9488.067692] ses 6:0:0:2: Failed to bind enclosure -19
Apr 19 12:35:26 safe5 com.canonical.indicator.application[1873]: (process:2050): indicator-application-service-WARNING **: Application already exists, re-req
uesting properties.
Apr 19 12:35:32 safe5 kernel: [ 9489.095572] .
Apr 19 12:35:34 safe5 kernel: [ 9496.007435] .
Apr 19 12:35:36 safe5 kernel: [ 9497.959602] .
Apr 19 12:35:38 safe5 kernel: [ 9499.911580] .
Apr 19 12:35:40 safe5 kernel: [ 9501.863560] .
Apr 19 12:35:42 safe5 kernel: [ 9503.815526] .
Apr 19 12:35:44 safe5 kernel: [ 9505.767521] .
Apr 19 12:35:46 safe5 kernel: [ 9507.719493] .
Apr 19 12:35:48 safe5 kernel: [ 9509.639304] .
Apr 19 12:35:50 safe5 kernel: [ 9511.591293] .
Apr 19 12:35:52 safe5 kernel: [ 9513.543421] .
Apr 19 12:35:54 safe5 kernel: [ 9515.495397] .
Apr 19 12:35:56 safe5 kernel: [ 9517.447378] .
Apr 19 12:35:58 safe5 kernel: [ 9519.399161] .
Apr 19 12:36:00 safe5 kernel: [ 9521.351332] .
Apr 19 12:36:02 safe5 kernel: [ 9523.303313] .
Apr 19 12:36:04 safe5 kernel: [ 9525.255294] .
Apr 19 12:36:06 safe5 kernel: [ 9527.207060] .
Apr 19 12:36:06 safe5 kernel: [ 9529.159242] .
Apr 19 12:36:06 safe5 kernel: [ 9529.279307] xhci_hcd 0000:00:14.0: Cannot set link state.
Apr 19 12:36:06 safe5 kernel: [ 9529.279317] usb usb2-port7: cannot disable (err = -32)



16.04 data-recovery




share|improve this question




















  • See if you can chkdsk d: /f on it in Windows. Change the d: to the appropriate drive designator.
    – heynnema
    Apr 19 at 18:40












up vote
1
down vote

favorite









up vote
1
down vote

favorite











A friend of mine recently had a WD USB HDD stop mounting in Windows. I reproduced the issue in my Windows workstation, and plugged the drive in to a Lubuntu 16.04 PC that I use with other USB 3.0 HDDs.
All I want to to is get the device to present itself as a block level device so I can get a raw disk image and work on recovering data from there out.



Syslog shows the device being connected, and the device appears under lsusb



 Bus 002 Device 005: ID 1058:25e2 Western Digital Technologies, Inc.


and here is the relevant part of syslog: 



Apr 19 12:35:22 safe5 kernel: [ 9485.583924] sd 6:0:0:0: [sdb] Attached SCSI disk
Apr 19 12:35:23 safe5 kernel: [ 9486.939647] usb 2-7: new SuperSpeed USB device number 5 using xhci_hcd
Apr 19 12:35:23 safe5 kernel: [ 9486.960693] usb 2-7: New USB device found, idVendor=1058, idProduct=25e2
Apr 19 12:35:23 safe5 kernel: [ 9486.960698] usb 2-7: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Apr 19 12:35:23 safe5 kernel: [ 9486.960701] usb 2-7: Product: My Passport 25E2
Apr 19 12:35:23 safe5 kernel: [ 9486.960704] usb 2-7: Manufacturer: Western Digital
Apr 19 12:35:23 safe5 kernel: [ 9486.960706] usb 2-7: SerialNumber: 575837314431374E33335230
Apr 19 12:35:23 safe5 kernel: [ 9486.961519] usb-storage 2-7:1.0: USB Mass Storage device detected
Apr 19 12:35:23 safe5 kernel: [ 9486.961653] scsi host6: usb-storage 2-7:1.0
Apr 19 12:35:23 safe5 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7"
Apr 19 12:35:23 safe5 mtp-probe: bus: 2, device: 5 was not an MTP device
Apr 19 12:35:24 safe5 kernel: [ 9487.976221] scsi 6:0:0:0: Direct-Access WD My Passport 25E2 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9487.976545] scsi 6:0:0:1: CD-ROM WD Virtual CD 25E2 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9488.028070] scsi 6:0:0:2: Enclosure WD SES Device 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9488.064204] sd 6:0:0:0: Attached scsi generic sg1 type 0
Apr 19 12:35:24 safe5 kernel: [ 9488.065447] sd 6:0:0:0: [sdb] Spinning up disk...
Apr 19 12:35:24 safe5 kernel: [ 9488.065613] sr 6:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
Apr 19 12:35:24 safe5 kernel: [ 9488.065846] sr 6:0:0:1: Attached scsi CD-ROM sr0
Apr 19 12:35:24 safe5 kernel: [ 9488.065971] sr 6:0:0:1: Attached scsi generic sg3 type 5
Apr 19 12:35:24 safe5 kernel: [ 9488.066123] ses 6:0:0:2: Attached Enclosure device
Apr 19 12:35:24 safe5 kernel: [ 9488.066219] ses 6:0:0:2: Attached scsi generic sg4 type 13
Apr 19 12:35:24 safe5 kernel: [ 9488.067679] ses 6:0:0:2: Wrong diagnostic page; asked for 1 got 8
Apr 19 12:35:24 safe5 kernel: [ 9488.067687] ses 6:0:0:2: Failed to get diagnostic page 0xffffffea
Apr 19 12:35:24 safe5 kernel: [ 9488.067692] ses 6:0:0:2: Failed to bind enclosure -19
Apr 19 12:35:26 safe5 com.canonical.indicator.application[1873]: (process:2050): indicator-application-service-WARNING **: Application already exists, re-req
uesting properties.
Apr 19 12:35:32 safe5 kernel: [ 9489.095572] .
Apr 19 12:35:34 safe5 kernel: [ 9496.007435] .
Apr 19 12:35:36 safe5 kernel: [ 9497.959602] .
Apr 19 12:35:38 safe5 kernel: [ 9499.911580] .
Apr 19 12:35:40 safe5 kernel: [ 9501.863560] .
Apr 19 12:35:42 safe5 kernel: [ 9503.815526] .
Apr 19 12:35:44 safe5 kernel: [ 9505.767521] .
Apr 19 12:35:46 safe5 kernel: [ 9507.719493] .
Apr 19 12:35:48 safe5 kernel: [ 9509.639304] .
Apr 19 12:35:50 safe5 kernel: [ 9511.591293] .
Apr 19 12:35:52 safe5 kernel: [ 9513.543421] .
Apr 19 12:35:54 safe5 kernel: [ 9515.495397] .
Apr 19 12:35:56 safe5 kernel: [ 9517.447378] .
Apr 19 12:35:58 safe5 kernel: [ 9519.399161] .
Apr 19 12:36:00 safe5 kernel: [ 9521.351332] .
Apr 19 12:36:02 safe5 kernel: [ 9523.303313] .
Apr 19 12:36:04 safe5 kernel: [ 9525.255294] .
Apr 19 12:36:06 safe5 kernel: [ 9527.207060] .
Apr 19 12:36:06 safe5 kernel: [ 9529.159242] .
Apr 19 12:36:06 safe5 kernel: [ 9529.279307] xhci_hcd 0000:00:14.0: Cannot set link state.
Apr 19 12:36:06 safe5 kernel: [ 9529.279317] usb usb2-port7: cannot disable (err = -32)



16.04 data-recovery




share|improve this question












A friend of mine recently had a WD USB HDD stop mounting in Windows. I reproduced the issue in my Windows workstation, and plugged the drive in to a Lubuntu 16.04 PC that I use with other USB 3.0 HDDs.
All I want to to is get the device to present itself as a block level device so I can get a raw disk image and work on recovering data from there out.



Syslog shows the device being connected, and the device appears under lsusb



 Bus 002 Device 005: ID 1058:25e2 Western Digital Technologies, Inc.


and here is the relevant part of syslog: 



Apr 19 12:35:22 safe5 kernel: [ 9485.583924] sd 6:0:0:0: [sdb] Attached SCSI disk
Apr 19 12:35:23 safe5 kernel: [ 9486.939647] usb 2-7: new SuperSpeed USB device number 5 using xhci_hcd
Apr 19 12:35:23 safe5 kernel: [ 9486.960693] usb 2-7: New USB device found, idVendor=1058, idProduct=25e2
Apr 19 12:35:23 safe5 kernel: [ 9486.960698] usb 2-7: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Apr 19 12:35:23 safe5 kernel: [ 9486.960701] usb 2-7: Product: My Passport 25E2
Apr 19 12:35:23 safe5 kernel: [ 9486.960704] usb 2-7: Manufacturer: Western Digital
Apr 19 12:35:23 safe5 kernel: [ 9486.960706] usb 2-7: SerialNumber: 575837314431374E33335230
Apr 19 12:35:23 safe5 kernel: [ 9486.961519] usb-storage 2-7:1.0: USB Mass Storage device detected
Apr 19 12:35:23 safe5 kernel: [ 9486.961653] scsi host6: usb-storage 2-7:1.0
Apr 19 12:35:23 safe5 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7"
Apr 19 12:35:23 safe5 mtp-probe: bus: 2, device: 5 was not an MTP device
Apr 19 12:35:24 safe5 kernel: [ 9487.976221] scsi 6:0:0:0: Direct-Access WD My Passport 25E2 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9487.976545] scsi 6:0:0:1: CD-ROM WD Virtual CD 25E2 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9488.028070] scsi 6:0:0:2: Enclosure WD SES Device 4004 PQ: 0 ANSI: 6
Apr 19 12:35:24 safe5 kernel: [ 9488.064204] sd 6:0:0:0: Attached scsi generic sg1 type 0
Apr 19 12:35:24 safe5 kernel: [ 9488.065447] sd 6:0:0:0: [sdb] Spinning up disk...
Apr 19 12:35:24 safe5 kernel: [ 9488.065613] sr 6:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
Apr 19 12:35:24 safe5 kernel: [ 9488.065846] sr 6:0:0:1: Attached scsi CD-ROM sr0
Apr 19 12:35:24 safe5 kernel: [ 9488.065971] sr 6:0:0:1: Attached scsi generic sg3 type 5
Apr 19 12:35:24 safe5 kernel: [ 9488.066123] ses 6:0:0:2: Attached Enclosure device
Apr 19 12:35:24 safe5 kernel: [ 9488.066219] ses 6:0:0:2: Attached scsi generic sg4 type 13
Apr 19 12:35:24 safe5 kernel: [ 9488.067679] ses 6:0:0:2: Wrong diagnostic page; asked for 1 got 8
Apr 19 12:35:24 safe5 kernel: [ 9488.067687] ses 6:0:0:2: Failed to get diagnostic page 0xffffffea
Apr 19 12:35:24 safe5 kernel: [ 9488.067692] ses 6:0:0:2: Failed to bind enclosure -19
Apr 19 12:35:26 safe5 com.canonical.indicator.application[1873]: (process:2050): indicator-application-service-WARNING **: Application already exists, re-req
uesting properties.
Apr 19 12:35:32 safe5 kernel: [ 9489.095572] .
Apr 19 12:35:34 safe5 kernel: [ 9496.007435] .
Apr 19 12:35:36 safe5 kernel: [ 9497.959602] .
Apr 19 12:35:38 safe5 kernel: [ 9499.911580] .
Apr 19 12:35:40 safe5 kernel: [ 9501.863560] .
Apr 19 12:35:42 safe5 kernel: [ 9503.815526] .
Apr 19 12:35:44 safe5 kernel: [ 9505.767521] .
Apr 19 12:35:46 safe5 kernel: [ 9507.719493] .
Apr 19 12:35:48 safe5 kernel: [ 9509.639304] .
Apr 19 12:35:50 safe5 kernel: [ 9511.591293] .
Apr 19 12:35:52 safe5 kernel: [ 9513.543421] .
Apr 19 12:35:54 safe5 kernel: [ 9515.495397] .
Apr 19 12:35:56 safe5 kernel: [ 9517.447378] .
Apr 19 12:35:58 safe5 kernel: [ 9519.399161] .
Apr 19 12:36:00 safe5 kernel: [ 9521.351332] .
Apr 19 12:36:02 safe5 kernel: [ 9523.303313] .
Apr 19 12:36:04 safe5 kernel: [ 9525.255294] .
Apr 19 12:36:06 safe5 kernel: [ 9527.207060] .
Apr 19 12:36:06 safe5 kernel: [ 9529.159242] .
Apr 19 12:36:06 safe5 kernel: [ 9529.279307] xhci_hcd 0000:00:14.0: Cannot set link state.
Apr 19 12:36:06 safe5 kernel: [ 9529.279317] usb usb2-port7: cannot disable (err = -32)




16.04 data-recovery





share|improve this question











share|improve this question




share|improve this question










asked Apr 19 at 18:06









BenCundiff

62




62











  • See if you can chkdsk d: /f on it in Windows. Change the d: to the appropriate drive designator.
    – heynnema
    Apr 19 at 18:40
















  • See if you can chkdsk d: /f on it in Windows. Change the d: to the appropriate drive designator.
    – heynnema
    Apr 19 at 18:40















See if you can chkdsk d: /f on it in Windows. Change the d: to the appropriate drive designator.
– heynnema
Apr 19 at 18:40




See if you can chkdsk d: /f on it in Windows. Change the d: to the appropriate drive designator.
– heynnema
Apr 19 at 18:40















active

oldest

votes











Your Answer







StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "89"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);

else
createEditor();

);

function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: false,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);



);













 

draft saved


draft discarded


















StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1026481%2fsuspected-failed-wd-usb-hdd-shows-in-lsusb-but-not-in-lsblk-how-can-i-get-it-to%23new-answer', 'question_page');

);

Post as a guest






















active

oldest

votes













active

oldest

votes









active

oldest

votes






active

oldest

votes















 

draft saved


draft discarded















































 


draft saved


draft discarded














StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1026481%2fsuspected-failed-wd-usb-hdd-shows-in-lsusb-but-not-in-lsblk-how-can-i-get-it-to%23new-answer', 'question_page');

);

Post as a guest
































































-

Popular posts from this blog

pylint3 and pip3 broken

Image
Clash Royale CLAN TAG #URR8PPP up vote 0 down vote favorite I have tried sudo apt remove --purge on various packages. I get the same when I reinstall. I have also tried reinstall using aptitude. This does not work. My current workaround is to run pylint3 as root, which works, but is bad practice. pip3 $ pip3 Traceback (most recent call last): File "/usr/lib/python3/dist-packages/pip/_vendor/__init__.py", line 33, in vendored __import__(vendored_name, globals(), locals(), level=0) ImportError: No module named 'pip._vendor.pkg_resources' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/bin/pip3", line 9, in <module> from pip import main File "/usr/lib/python3/dist-packages/pip/__init__.py", line 13, in <module> from pip.exceptions import InstallationError, CommandError, PipError File "/usr/lib/python3/dist-packages/pip/exceptions.py", line 6, ...
Read more

Missing snmpget and snmpwalk

Image
Clash Royale CLAN TAG #URR8PPP up vote 0 down vote favorite I have installed Zabbix appliance, directly preinstalled and found that there is missing snmpwalk and snmpget commands. I tried to install it with: apt-get install net-snmp-utils but I have error message: Unable to locate package. I have also check what from SNMP is preinstalled and there is: libsnmp-base libsnmp30:amd64 snmp-mibs-downloader snmpd snmptrapd snmptrapfmt How can I install snmpget and snmpwalk ? snmp zabbix share | improve this question edited Jan 29 at 10:10 Yaron 8,552 7 18 38 asked Jan 29 at 9:51 Alfista 1 apt install snmp perhaps ? If named differently - apt cache snmp – fugitive Jan 29 at 10:00 add a comment  |  up vote 0 down vote favorite I have installed Zabbix appliance, directly preinstalled and found that there is missing snmpwalk and snmpget commands. I tried...
Read more

How to enroll fingerprints to Ubuntu 17.10 with VFS491

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite I decided to switch from Windows to Ubuntu 17.10, I meet it like 8 years ago and I didn't decided to switch until now (haha). Well, my actual device is an HP Probook 4540s with a Validity fingerprint sensor (VFS491). The fingerprint sensor worked fine on Windows but I can't get it to work in Ubuntu. The device is recognized as 138a:003d but is not detected as a fingerprint scanner by some apps like Fingerprint GUI. I want to use the fingerprint scanner to log in into my user account in Ubuntu but it doesn't supports fingerprints without special software and the drivers of the fingerprint scanner are available for Windows but not for any Linux distribution. I found something on GitHub (https://github.com/eekpie/libfprint) about the integration of the VFS491 in libfprint and I think it can help but I don't know what to do with it, so that's why I need the help of the community to do it since I am...
Read more