Gfilui

I installed a clean Ubuntu18.04 with minimal installation and installed the xrdp package.

After the XRDP user/password there is a password prompt in ubuntu for my user popping up. When I enter it the connection just dies and the connection windows dissapears.

Does anyone got xrdp running on the 18.04 release yet?

Thanks in advance

It works fine with my desktop!

The good news is it works good with Nvidia drivers so far.

However there is still some issue to be fixed:

1. If you are not logout in local, the remote login would fail.


2. 
   

   It would ask you to input password after login once again.

   
   
   

   

   
   


3. 
   

   After login, it would ask for a authentication.

   
   
   

   

   
   
   

   And this authenticate would never pass unless you click cancel. (Just cancel it, then you can get in the Desktop.)

   
   

to avoid the authenticate popup,you might execute the command below

(provide by this post):

sudo bash -c "cat >/etc/polkit-1/localauthority/50-local.d/45-allow.colord.pkla" <<EOF
[Allow Colord all Users]
Identity=unix-user:*
Action=org.freedesktop.color-manager.create-device;org.freedesktop.color-manager.create-profile;org.freedesktop.color-manager.delete-device;org.freedesktop.color-manager.delete-profile;org.freedesktop.color-manager.modify-device;org.freedesktop.color-manager.modify-profile
ResultAny=no
ResultInactive=no
ResultActive=yes
EOF

If the problem is not solved, I'll suggest you to:

1. 
   

   Install drivers by:

   
   
   

   sudo apt-get update
   sudo ubuntu-drivers autoinstall
   

   
   



2. Log out any local logged-in account.

To answer the OPs question:

Ubuntu didn't work until I added gnome-session to /etc/xrdp/startwm.sh. I commented out the test and exec lines at the bottom of the file and added gnome-session (not sure if that was the correct way to do it or not... but it worked).

It prompts me for access to create a color correction device. I authenticated and had to reboot for the prompts to go away.

If you're going to try other flavors, here is what I found:

I just did a fresh install of 18.04 UbuntuBudgie, Kubuntu, Xubuntu, and Ubuntu. Only Kubuntu worked with XRDP out of the box on bare metal with hardline networking.

Kubuntu gives you a desktop but nags you about a network connections policy. I removed the network widget from the system tray and it worked without hassle after that. This was the smoothest experience of the ones I tried out.

Xubuntu didn't work out of the box (This fixed it - How to configure XRDP to start cinnamon as default desktop session - See the section that has startxfce4 in there which amounts to adding startxfce4 to /etc/xrdp/startwm.sh).

UbuntuBudgie didn't work until I added budgie-desktop to /etc/xrdp/startwm.sh. Again not sure if that was the "correct" way to do it but it worked.

I run my XRDP installation on a KVM virtual machine, and thus it won't work without installing the xorgxrdp -package.

I am seeing similar in Kubuntu 18.04.
If you are logged in locally and you try to XRDP into the same machine, the session will disconnect (no errors, just disconnect).
I have found the opposite is true also - if you disconnect an XRDP session without logging out, then try logging in locally you get disconnected.
Maybe there is a setting somewhere to allow multiple sessions?

Read / Do this:
http://c-nergy.be/blog/?p=11868 <--Before execute the downloaded script (Std-Xrdp-Install-0.2.sh) Do this:
Edit the downloaded script and:

1. Remove the part where is checking you Ubuntu version (Only if are you sure that you have Ubuntu Desktop 18.04), save and execute the script, then...


2. Restart all you Ubuntu Desktop 18.04 and do not login, in Windows side connect using remote desktop.

Tip: If can not connect to Ubuntu 18.04, login in Ubuntu 18.04 and type this in a terminal: sudo systemctl enable xrdp, then restart your Ubuntu Desktop 18.04 again and do not login in, go to Windows side and try the connection again using remote desktop.

hope that I am in the relevant place, i finished to install Ubuntu 18.04 and add the server into my domain, all working fine and I am able to login with the domain user from the Vmware console and from the Putty but when I am using XRDP for RDP and put the domain user and pass I am not able to login. with the SU user, I can log in to the machine using XRDP without any issue.

anyone have the same issue or have any suggestions what should I do in order to solve this issue?

thanks.