Samsung Xpress M2070FW won't print PDF on Ubuntu 17.10 x64
Clash Royale CLAN TAG#URR8PPP up vote
1
down vote
favorite
I tried to install HP or Samsung ULD drivers but still problems printing only pdf.
Scanning is ok, print text files is ok!
I tried to use "Samsung M2070 Series, driverless, cups-filters 1.17.9" or "Samsung M2070 Series [en]" drivers without success.
Please, someone help me please?
Thanks a lot
drivers printing 64-bit pdf
asked Feb 27 at 15:32
pPier
63
add a comment |Â
up vote
1
down vote
favorite
I tried to install HP or Samsung ULD drivers but still problems printing only pdf.
Scanning is ok, print text files is ok!
I tried to use "Samsung M2070 Series, driverless, cups-filters 1.17.9" or "Samsung M2070 Series [en]" drivers without success.
Please, someone help me please?
Thanks a lot
drivers printing 64-bit pdf
asked Feb 27 at 15:32
pPier
63
when you say "tried to install": do you think you succeeded please? If you open the PRINTERS folder; there should be one? icon for your Samsung; if you right-click on that; look in PROPERTIES; then down to MAKE & MODEL can you tell us what is in that line please?
– pdc
Feb 27 at 21:26
the reference to "Samsung M2070 Series, driverless, cups-filters 1.17.9" would be the airprint-compatible driver set up; airprint came with 17.04 and the printer is listed here as compatible support.apple.com/en-nz/HT201311 but 17.10 seems to have printing problems; we can only hope that it is sorted by April; when 18.04 appears
– pdc
Feb 27 at 21:30
@pdc: yes, the drivers are installed without issues. The printer is listed and proprierties are shown but everytime I shut Off and then On using "additional printer settings" -> (right click on printer) Properties it loose "orientation-requested" and "print-quality" values... Anyway, the printer and the scanner are working, I have issues when I'm printing the PDF's (using the standard evince viewer)
– pPier
Feb 28 at 15:53
add a comment |Â
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I tried to install HP or Samsung ULD drivers but still problems printing only pdf.
Scanning is ok, print text files is ok!
I tried to use "Samsung M2070 Series, driverless, cups-filters 1.17.9" or "Samsung M2070 Series [en]" drivers without success.
Please, someone help me please?
Thanks a lot
drivers printing 64-bit pdf
asked Feb 27 at 15:32
pPier
63
I tried to install HP or Samsung ULD drivers but still problems printing only pdf.
Scanning is ok, print text files is ok!
I tried to use "Samsung M2070 Series, driverless, cups-filters 1.17.9" or "Samsung M2070 Series [en]" drivers without success.
Please, someone help me please?
Thanks a lot
drivers printing 64-bit pdf
drivers printing 64-bit pdf
asked Feb 27 at 15:32
pPier
63
asked Feb 27 at 15:32
pPier
63
asked Feb 27 at 15:32
pPier
63
asked Feb 27 at 15:32
pPier
63
asked Feb 27 at 15:32
pPier
63
63
when you say "tried to install": do you think you succeeded please? If you open the PRINTERS folder; there should be one? icon for your Samsung; if you right-click on that; look in PROPERTIES; then down to MAKE & MODEL can you tell us what is in that line please?
– pdc
Feb 27 at 21:26
the reference to "Samsung M2070 Series, driverless, cups-filters 1.17.9" would be the airprint-compatible driver set up; airprint came with 17.04 and the printer is listed here as compatible support.apple.com/en-nz/HT201311 but 17.10 seems to have printing problems; we can only hope that it is sorted by April; when 18.04 appears
– pdc
Feb 27 at 21:30
@pdc: yes, the drivers are installed without issues. The printer is listed and proprierties are shown but everytime I shut Off and then On using "additional printer settings" -> (right click on printer) Properties it loose "orientation-requested" and "print-quality" values... Anyway, the printer and the scanner are working, I have issues when I'm printing the PDF's (using the standard evince viewer)
– pPier
Feb 28 at 15:53
add a comment |Â
when you say "tried to install": do you think you succeeded please? If you open the PRINTERS folder; there should be one? icon for your Samsung; if you right-click on that; look in PROPERTIES; then down to MAKE & MODEL can you tell us what is in that line please?
– pdc
Feb 27 at 21:26
the reference to "Samsung M2070 Series, driverless, cups-filters 1.17.9" would be the airprint-compatible driver set up; airprint came with 17.04 and the printer is listed here as compatible support.apple.com/en-nz/HT201311 but 17.10 seems to have printing problems; we can only hope that it is sorted by April; when 18.04 appears
– pdc
Feb 27 at 21:30
@pdc: yes, the drivers are installed without issues. The printer is listed and proprierties are shown but everytime I shut Off and then On using "additional printer settings" -> (right click on printer) Properties it loose "orientation-requested" and "print-quality" values... Anyway, the printer and the scanner are working, I have issues when I'm printing the PDF's (using the standard evince viewer)
– pPier
Feb 28 at 15:53
when you say "tried to install": do you think you succeeded please? If you open the PRINTERS folder; there should be one? icon for your Samsung; if you right-click on that; look in PROPERTIES; then down to MAKE & MODEL can you tell us what is in that line please?
– pdc
Feb 27 at 21:26
when you say "tried to install": do you think you succeeded please? If you open the PRINTERS folder; there should be one? icon for your Samsung; if you right-click on that; look in PROPERTIES; then down to MAKE & MODEL can you tell us what is in that line please?
– pdc
Feb 27 at 21:26
the reference to "Samsung M2070 Series, driverless, cups-filters 1.17.9" would be the airprint-compatible driver set up; airprint came with 17.04 and the printer is listed here as compatible support.apple.com/en-nz/HT201311 but 17.10 seems to have printing problems; we can only hope that it is sorted by April; when 18.04 appears
– pdc
Feb 27 at 21:30
the reference to "Samsung M2070 Series, driverless, cups-filters 1.17.9" would be the airprint-compatible driver set up; airprint came with 17.04 and the printer is listed here as compatible support.apple.com/en-nz/HT201311 but 17.10 seems to have printing problems; we can only hope that it is sorted by April; when 18.04 appears
– pdc
Feb 27 at 21:30
@pdc: yes, the drivers are installed without issues. The printer is listed and proprierties are shown but everytime I shut Off and then On using "additional printer settings" -> (right click on printer) Properties it loose "orientation-requested" and "print-quality" values... Anyway, the printer and the scanner are working, I have issues when I'm printing the PDF's (using the standard evince viewer)
– pPier
Feb 28 at 15:53
@pdc: yes, the drivers are installed without issues. The printer is listed and proprierties are shown but everytime I shut Off and then On using "additional printer settings" -> (right click on printer) Properties it loose "orientation-requested" and "print-quality" values... Anyway, the printer and the scanner are working, I have issues when I'm printing the PDF's (using the standard evince viewer)
– pPier
Feb 28 at 15:53
add a comment |Â
1 Answer
1
active
oldest
votes
up vote
0
down vote
for Samsung's drivers, one would go here https://support.hp.com/nz-en/drivers/selfservice/samsung-xpress-sl-m2070-laser-multifunction-printer-series/16450377 and click to download what seems currently to be uld_v1.00.37_00.99.tar.gz
then open a terminal; copy each command below line by line; PASTE into the terminal; hit the enter key; move to copy the next line ..
cd Downloads
tar -zxvf uld_v1.00.37_00.99.tar.gz
cd uld
sudo ./install.sh
and that final script runs the install script; .. and all should be good
answered Feb 27 at 21:55
pdc
67436
Hi, I unistalled old drivers (suldr via ppa) and installed that like suggested from hp. I've to check all conditions but now I've 2 printers in control panel, one is named "M2070" and the other is named "Samsung_M2070_Series_SEC30CDA7218B30_". I tried to remove the printer from the control panel after unistalling drivers but the printer appear everytime...
– pPier
Feb 28 at 17:26
The printer initially was connected both usb and wi-fi, now the usb cable has been disconnected.
– pPier
Feb 28 at 17:32
as in top comment: look in MAKE & MODEL and tell us what each icon says please;
– pdc
Mar 1 at 1:23
that icon says "Samsung M2070 Series"
– pPier
Mar 1 at 11:11
does either make the printer work?
– pdc
Mar 2 at 0:27
 |Â
show 6 more comments
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
for Samsung's drivers, one would go here https://support.hp.com/nz-en/drivers/selfservice/samsung-xpress-sl-m2070-laser-multifunction-printer-series/16450377 and click to download what seems currently to be uld_v1.00.37_00.99.tar.gz
then open a terminal; copy each command below line by line; PASTE into the terminal; hit the enter key; move to copy the next line ..
cd Downloads
tar -zxvf uld_v1.00.37_00.99.tar.gz
cd uld
sudo ./install.sh
and that final script runs the install script; .. and all should be good
answered Feb 27 at 21:55
pdc
67436
Hi, I unistalled old drivers (suldr via ppa) and installed that like suggested from hp. I've to check all conditions but now I've 2 printers in control panel, one is named "M2070" and the other is named "Samsung_M2070_Series_SEC30CDA7218B30_". I tried to remove the printer from the control panel after unistalling drivers but the printer appear everytime...
– pPier
Feb 28 at 17:26
The printer initially was connected both usb and wi-fi, now the usb cable has been disconnected.
– pPier
Feb 28 at 17:32
as in top comment: look in MAKE & MODEL and tell us what each icon says please;
– pdc
Mar 1 at 1:23
that icon says "Samsung M2070 Series"
– pPier
Mar 1 at 11:11
does either make the printer work?
– pdc
Mar 2 at 0:27
 |Â
show 6 more comments
up vote
0
down vote
for Samsung's drivers, one would go here https://support.hp.com/nz-en/drivers/selfservice/samsung-xpress-sl-m2070-laser-multifunction-printer-series/16450377 and click to download what seems currently to be uld_v1.00.37_00.99.tar.gz
then open a terminal; copy each command below line by line; PASTE into the terminal; hit the enter key; move to copy the next line ..
cd Downloads
tar -zxvf uld_v1.00.37_00.99.tar.gz
cd uld
sudo ./install.sh
and that final script runs the install script; .. and all should be good
answered Feb 27 at 21:55
pdc
67436
Hi, I unistalled old drivers (suldr via ppa) and installed that like suggested from hp. I've to check all conditions but now I've 2 printers in control panel, one is named "M2070" and the other is named "Samsung_M2070_Series_SEC30CDA7218B30_". I tried to remove the printer from the control panel after unistalling drivers but the printer appear everytime...
– pPier
Feb 28 at 17:26
The printer initially was connected both usb and wi-fi, now the usb cable has been disconnected.
– pPier
Feb 28 at 17:32
as in top comment: look in MAKE & MODEL and tell us what each icon says please;
– pdc
Mar 1 at 1:23
that icon says "Samsung M2070 Series"
– pPier
Mar 1 at 11:11
does either make the printer work?
– pdc
Mar 2 at 0:27
 |Â
show 6 more comments
up vote
0
down vote
up vote
0
down vote
for Samsung's drivers, one would go here https://support.hp.com/nz-en/drivers/selfservice/samsung-xpress-sl-m2070-laser-multifunction-printer-series/16450377 and click to download what seems currently to be uld_v1.00.37_00.99.tar.gz
then open a terminal; copy each command below line by line; PASTE into the terminal; hit the enter key; move to copy the next line ..
cd Downloads
tar -zxvf uld_v1.00.37_00.99.tar.gz
cd uld
sudo ./install.sh
and that final script runs the install script; .. and all should be good
answered Feb 27 at 21:55
pdc
67436
for Samsung's drivers, one would go here https://support.hp.com/nz-en/drivers/selfservice/samsung-xpress-sl-m2070-laser-multifunction-printer-series/16450377 and click to download what seems currently to be uld_v1.00.37_00.99.tar.gz
then open a terminal; copy each command below line by line; PASTE into the terminal; hit the enter key; move to copy the next line ..
cd Downloads
tar -zxvf uld_v1.00.37_00.99.tar.gz
cd uld
sudo ./install.sh
and that final script runs the install script; .. and all should be good
answered Feb 27 at 21:55
pdc
67436
answered Feb 27 at 21:55
pdc
67436
answered Feb 27 at 21:55
pdc
67436
answered Feb 27 at 21:55
pdc
67436
67436
Hi, I unistalled old drivers (suldr via ppa) and installed that like suggested from hp. I've to check all conditions but now I've 2 printers in control panel, one is named "M2070" and the other is named "Samsung_M2070_Series_SEC30CDA7218B30_". I tried to remove the printer from the control panel after unistalling drivers but the printer appear everytime...
– pPier
Feb 28 at 17:26
The printer initially was connected both usb and wi-fi, now the usb cable has been disconnected.
– pPier
Feb 28 at 17:32
as in top comment: look in MAKE & MODEL and tell us what each icon says please;
– pdc
Mar 1 at 1:23
that icon says "Samsung M2070 Series"
– pPier
Mar 1 at 11:11
does either make the printer work?
– pdc
Mar 2 at 0:27
 |Â
show 6 more comments
Hi, I unistalled old drivers (suldr via ppa) and installed that like suggested from hp. I've to check all conditions but now I've 2 printers in control panel, one is named "M2070" and the other is named "Samsung_M2070_Series_SEC30CDA7218B30_". I tried to remove the printer from the control panel after unistalling drivers but the printer appear everytime...
– pPier
Feb 28 at 17:26
The printer initially was connected both usb and wi-fi, now the usb cable has been disconnected.
– pPier
Feb 28 at 17:32
as in top comment: look in MAKE & MODEL and tell us what each icon says please;
– pdc
Mar 1 at 1:23
that icon says "Samsung M2070 Series"
– pPier
Mar 1 at 11:11
does either make the printer work?
– pdc
Mar 2 at 0:27
Hi, I unistalled old drivers (suldr via ppa) and installed that like suggested from hp. I've to check all conditions but now I've 2 printers in control panel, one is named "M2070" and the other is named "Samsung_M2070_Series_SEC30CDA7218B30_". I tried to remove the printer from the control panel after unistalling drivers but the printer appear everytime...
– pPier
Feb 28 at 17:26
Hi, I unistalled old drivers (suldr via ppa) and installed that like suggested from hp. I've to check all conditions but now I've 2 printers in control panel, one is named "M2070" and the other is named "Samsung_M2070_Series_SEC30CDA7218B30_". I tried to remove the printer from the control panel after unistalling drivers but the printer appear everytime...
– pPier
Feb 28 at 17:26
The printer initially was connected both usb and wi-fi, now the usb cable has been disconnected.
– pPier
Feb 28 at 17:32
The printer initially was connected both usb and wi-fi, now the usb cable has been disconnected.
– pPier
Feb 28 at 17:32
as in top comment: look in MAKE & MODEL and tell us what each icon says please;
– pdc
Mar 1 at 1:23
as in top comment: look in MAKE & MODEL and tell us what each icon says please;
– pdc
Mar 1 at 1:23
that icon says "Samsung M2070 Series"
– pPier
Mar 1 at 11:11
that icon says "Samsung M2070 Series"
– pPier
Mar 1 at 11:11
does either make the printer work?
– pdc
Mar 2 at 0:27
does either make the printer work?
– pdc
Mar 2 at 0:27
 |Â
show 6 more comments
Â
draft saved
draft discarded
Â
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1010312%2fsamsung-xpress-m2070fw-wont-print-pdf-on-ubuntu-17-10-x64%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
when you say "tried to install": do you think you succeeded please? If you open the PRINTERS folder; there should be one? icon for your Samsung; if you right-click on that; look in PROPERTIES; then down to MAKE & MODEL can you tell us what is in that line please?
– pdc
Feb 27 at 21:26
the reference to "Samsung M2070 Series, driverless, cups-filters 1.17.9" would be the airprint-compatible driver set up; airprint came with 17.04 and the printer is listed here as compatible support.apple.com/en-nz/HT201311 but 17.10 seems to have printing problems; we can only hope that it is sorted by April; when 18.04 appears
– pdc
Feb 27 at 21:30
@pdc: yes, the drivers are installed without issues. The printer is listed and proprierties are shown but everytime I shut Off and then On using "additional printer settings" -> (right click on printer) Properties it loose "orientation-requested" and "print-quality" values... Anyway, the printer and the scanner are working, I have issues when I'm printing the PDF's (using the standard evince viewer)
– pPier
Feb 28 at 15:53