Ubuntu Install firmware for ath10k_pci
Clash Royale CLAN TAG#URR8PPP up vote
2
down vote
favorite
I'm using Ubuntu 18.04, how can I install firmware for ath10k_pci? There is a post for U14.04, but I'm not sure I can do the same in the answers.
thx for help
[ 4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
for dmesg | grep ath10k ->
[ 3.792117] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 3.792420] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
[ 4.078895] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
[ 4.078898] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 4.079373] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f
[ 4.146481] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 4.780156] ath10k_pci 0000:03:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 4.790875] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[ 964.323485] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer 9c:c7:a6:92:ce:82: -110
drivers 18.04
edited Jun 10 at 18:09
Thomas Ward♦
40.9k23110166
asked Jun 10 at 14:58
leandro
111
add a comment |Â
up vote
2
down vote
favorite
I'm using Ubuntu 18.04, how can I install firmware for ath10k_pci? There is a post for U14.04, but I'm not sure I can do the same in the answers.
thx for help
[ 4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
for dmesg | grep ath10k ->
[ 3.792117] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 3.792420] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
[ 4.078895] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
[ 4.078898] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 4.079373] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f
[ 4.146481] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 4.780156] ath10k_pci 0000:03:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 4.790875] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[ 964.323485] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer 9c:c7:a6:92:ce:82: -110
drivers 18.04
edited Jun 10 at 18:09
Thomas Ward♦
40.9k23110166
asked Jun 10 at 14:58
leandro
111
What is your kernel version?uname -a?
– Pilot6
Jun 10 at 15:02
And please post the output ofdmesg | grep ath10kto your question.
– Pilot6
Jun 10 at 15:08
uname -a : Linux lenovo-v510-i5 4.15.0-22-generic #24-Ubuntu SMP Wed May 16 12:15:17 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
– leandro
Jun 10 at 17:58
Does the device work?
– Pilot6
Jun 10 at 18:09
Put new information and output of commands into your question as an edit, and not as new answers, please.
– Thomas Ward♦
Jun 10 at 18:10
add a comment |Â
up vote
2
down vote
favorite
up vote
2
down vote
favorite
I'm using Ubuntu 18.04, how can I install firmware for ath10k_pci? There is a post for U14.04, but I'm not sure I can do the same in the answers.
thx for help
[ 4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
for dmesg | grep ath10k ->
[ 3.792117] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 3.792420] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
[ 4.078895] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
[ 4.078898] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 4.079373] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f
[ 4.146481] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 4.780156] ath10k_pci 0000:03:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 4.790875] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[ 964.323485] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer 9c:c7:a6:92:ce:82: -110
drivers 18.04
edited Jun 10 at 18:09
Thomas Ward♦
40.9k23110166
asked Jun 10 at 14:58
leandro
111
I'm using Ubuntu 18.04, how can I install firmware for ath10k_pci? There is a post for U14.04, but I'm not sure I can do the same in the answers.
thx for help
[ 4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
for dmesg | grep ath10k ->
[ 3.792117] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 3.792420] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
[ 4.078895] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
[ 4.078898] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 4.079373] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f
[ 4.146481] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[ 4.780156] ath10k_pci 0000:03:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 4.790875] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[ 964.323485] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer 9c:c7:a6:92:ce:82: -110
drivers 18.04
edited Jun 10 at 18:09
Thomas Ward♦
40.9k23110166
asked Jun 10 at 14:58
leandro
111
edited Jun 10 at 18:09
Thomas Ward♦
40.9k23110166
edited Jun 10 at 18:09
Thomas Ward♦
40.9k23110166
edited Jun 10 at 18:09
Thomas Ward♦
40.9k23110166
40.9k23110166
asked Jun 10 at 14:58
leandro
111
asked Jun 10 at 14:58
leandro
111
asked Jun 10 at 14:58
leandro
111
111
What is your kernel version?uname -a?
– Pilot6
Jun 10 at 15:02
And please post the output ofdmesg | grep ath10kto your question.
– Pilot6
Jun 10 at 15:08
uname -a : Linux lenovo-v510-i5 4.15.0-22-generic #24-Ubuntu SMP Wed May 16 12:15:17 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
– leandro
Jun 10 at 17:58
Does the device work?
– Pilot6
Jun 10 at 18:09
Put new information and output of commands into your question as an edit, and not as new answers, please.
– Thomas Ward♦
Jun 10 at 18:10
add a comment |Â
What is your kernel version?uname -a?
– Pilot6
Jun 10 at 15:02
And please post the output ofdmesg | grep ath10kto your question.
– Pilot6
Jun 10 at 15:08
uname -a : Linux lenovo-v510-i5 4.15.0-22-generic #24-Ubuntu SMP Wed May 16 12:15:17 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
– leandro
Jun 10 at 17:58
Does the device work?
– Pilot6
Jun 10 at 18:09
Put new information and output of commands into your question as an edit, and not as new answers, please.
– Thomas Ward♦
Jun 10 at 18:10
What is your kernel version?
uname -a?– Pilot6
Jun 10 at 15:02
What is your kernel version?
uname -a?– Pilot6
Jun 10 at 15:02
And please post the output of
dmesg | grep ath10k to your question.– Pilot6
Jun 10 at 15:08
And please post the output of
dmesg | grep ath10k to your question.– Pilot6
Jun 10 at 15:08
uname -a : Linux lenovo-v510-i5 4.15.0-22-generic #24-Ubuntu SMP Wed May 16 12:15:17 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
– leandro
Jun 10 at 17:58
uname -a : Linux lenovo-v510-i5 4.15.0-22-generic #24-Ubuntu SMP Wed May 16 12:15:17 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
– leandro
Jun 10 at 17:58
Does the device work?
– Pilot6
Jun 10 at 18:09
Does the device work?
– Pilot6
Jun 10 at 18:09
Put new information and output of commands into your question as an edit, and not as new answers, please.
– Thomas Ward♦
Jun 10 at 18:10
Put new information and output of commands into your question as an edit, and not as new answers, please.
– Thomas Ward♦
Jun 10 at 18:10
add a comment |Â
1 Answer
1
active
oldest
votes
up vote
0
down vote
It looks like everything is OK with your device.
Kernel developers added code to look for some files that don't exist yet for the future.
ath10k doesn't work without firmware. In your case it is loaded.
Nothing has to be done.
answered Jun 10 at 18:12
Pilot6
50.1k15104185
the problem is I cant copy datas on my nas using wlan, with a cable it works. so I thought it's because of the wlan-card...
– leandro
Jun 11 at 17:03
add a comment |Â
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
It looks like everything is OK with your device.
Kernel developers added code to look for some files that don't exist yet for the future.
ath10k doesn't work without firmware. In your case it is loaded.
Nothing has to be done.
answered Jun 10 at 18:12
Pilot6
50.1k15104185
the problem is I cant copy datas on my nas using wlan, with a cable it works. so I thought it's because of the wlan-card...
– leandro
Jun 11 at 17:03
add a comment |Â
up vote
0
down vote
It looks like everything is OK with your device.
Kernel developers added code to look for some files that don't exist yet for the future.
ath10k doesn't work without firmware. In your case it is loaded.
Nothing has to be done.
answered Jun 10 at 18:12
Pilot6
50.1k15104185
the problem is I cant copy datas on my nas using wlan, with a cable it works. so I thought it's because of the wlan-card...
– leandro
Jun 11 at 17:03
add a comment |Â
up vote
0
down vote
up vote
0
down vote
It looks like everything is OK with your device.
Kernel developers added code to look for some files that don't exist yet for the future.
ath10k doesn't work without firmware. In your case it is loaded.
Nothing has to be done.
answered Jun 10 at 18:12
Pilot6
50.1k15104185
It looks like everything is OK with your device.
Kernel developers added code to look for some files that don't exist yet for the future.
ath10k doesn't work without firmware. In your case it is loaded.
Nothing has to be done.
answered Jun 10 at 18:12
Pilot6
50.1k15104185
answered Jun 10 at 18:12
Pilot6
50.1k15104185
answered Jun 10 at 18:12
Pilot6
50.1k15104185
answered Jun 10 at 18:12
Pilot6
50.1k15104185
50.1k15104185
the problem is I cant copy datas on my nas using wlan, with a cable it works. so I thought it's because of the wlan-card...
– leandro
Jun 11 at 17:03
add a comment |Â
the problem is I cant copy datas on my nas using wlan, with a cable it works. so I thought it's because of the wlan-card...
– leandro
Jun 11 at 17:03
the problem is I cant copy datas on my nas using wlan, with a cable it works. so I thought it's because of the wlan-card...
– leandro
Jun 11 at 17:03
the problem is I cant copy datas on my nas using wlan, with a cable it works. so I thought it's because of the wlan-card...
– leandro
Jun 11 at 17:03
add a comment |Â
Â
draft saved
draft discarded
Â
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1045319%2fubuntu-install-firmware-for-ath10k-pci%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
What is your kernel version?
uname -a?– Pilot6
Jun 10 at 15:02
And please post the output of
dmesg | grep ath10kto your question.– Pilot6
Jun 10 at 15:08
uname -a : Linux lenovo-v510-i5 4.15.0-22-generic #24-Ubuntu SMP Wed May 16 12:15:17 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
– leandro
Jun 10 at 17:58
Does the device work?
– Pilot6
Jun 10 at 18:09
Put new information and output of commands into your question as an edit, and not as new answers, please.
– Thomas Ward♦
Jun 10 at 18:10