Something similar to GNOME's AlternateTab on Unity?
Clash Royale CLAN TAG#URR8PPP up vote
3
down vote
favorite
I just installed Ubuntu 16.04, and I unfortunately find the application switcher (launched by alt+tab) kind of confusing. I found the AlternateTab Extension for GNOME and like the look of it, but was sad to find out that I apparently cannot use it in Unity.
Is there any way around this? Is there any alternatives? I've looked at the CCSM, but I like the look of AlternateTab better (it probably reminds me more of the Win7 I've just left).
Thanks.
EDIT: Here's how it looks like right now:
unity gnome compiz
edited May 10 at 11:27
fkraiem
8,41021627
asked May 8 at 22:32
Bobson Dugnutt
1165
 |Â
show 2 more comments
up vote
3
down vote
favorite
I just installed Ubuntu 16.04, and I unfortunately find the application switcher (launched by alt+tab) kind of confusing. I found the AlternateTab Extension for GNOME and like the look of it, but was sad to find out that I apparently cannot use it in Unity.
Is there any way around this? Is there any alternatives? I've looked at the CCSM, but I like the look of AlternateTab better (it probably reminds me more of the Win7 I've just left).
Thanks.
EDIT: Here's how it looks like right now:
unity gnome compiz
edited May 10 at 11:27
fkraiem
8,41021627
asked May 8 at 22:32
Bobson Dugnutt
1165
Is the super+w combination what you're looking for? ("super" is usually the key with Windows logo or equivalent.)
– pomsky
May 8 at 22:35
@pomsky Nope, sorry, I'd like to not use my mouse when changing between apps.
– Bobson Dugnutt
May 8 at 22:37
What about alt+key above tab?
– pomsky
May 9 at 10:17
Your.gifis cool but it doesn't look like any Unity I've used.
– WinEunuuchs2Unix
May 9 at 19:59
@WinEunuuchs2Unix Well that sucks. All right, thanks for your help anyways.
– Bobson Dugnutt
May 9 at 20:00
 |Â
show 2 more comments
up vote
3
down vote
favorite
up vote
3
down vote
favorite
I just installed Ubuntu 16.04, and I unfortunately find the application switcher (launched by alt+tab) kind of confusing. I found the AlternateTab Extension for GNOME and like the look of it, but was sad to find out that I apparently cannot use it in Unity.
Is there any way around this? Is there any alternatives? I've looked at the CCSM, but I like the look of AlternateTab better (it probably reminds me more of the Win7 I've just left).
Thanks.
EDIT: Here's how it looks like right now:
unity gnome compiz
edited May 10 at 11:27
fkraiem
8,41021627
asked May 8 at 22:32
Bobson Dugnutt
1165
I just installed Ubuntu 16.04, and I unfortunately find the application switcher (launched by alt+tab) kind of confusing. I found the AlternateTab Extension for GNOME and like the look of it, but was sad to find out that I apparently cannot use it in Unity.
Is there any way around this? Is there any alternatives? I've looked at the CCSM, but I like the look of AlternateTab better (it probably reminds me more of the Win7 I've just left).
Thanks.
EDIT: Here's how it looks like right now:
unity gnome compiz
edited May 10 at 11:27
fkraiem
8,41021627
asked May 8 at 22:32
Bobson Dugnutt
1165
edited May 10 at 11:27
fkraiem
8,41021627
edited May 10 at 11:27
fkraiem
8,41021627
edited May 10 at 11:27
fkraiem
8,41021627
8,41021627
asked May 8 at 22:32
Bobson Dugnutt
1165
asked May 8 at 22:32
Bobson Dugnutt
1165
asked May 8 at 22:32
Bobson Dugnutt
1165
1165
Is the super+w combination what you're looking for? ("super" is usually the key with Windows logo or equivalent.)
– pomsky
May 8 at 22:35
@pomsky Nope, sorry, I'd like to not use my mouse when changing between apps.
– Bobson Dugnutt
May 8 at 22:37
What about alt+key above tab?
– pomsky
May 9 at 10:17
Your.gifis cool but it doesn't look like any Unity I've used.
– WinEunuuchs2Unix
May 9 at 19:59
@WinEunuuchs2Unix Well that sucks. All right, thanks for your help anyways.
– Bobson Dugnutt
May 9 at 20:00
 |Â
show 2 more comments
Is the super+w combination what you're looking for? ("super" is usually the key with Windows logo or equivalent.)
– pomsky
May 8 at 22:35
@pomsky Nope, sorry, I'd like to not use my mouse when changing between apps.
– Bobson Dugnutt
May 8 at 22:37
What about alt+key above tab?
– pomsky
May 9 at 10:17
Your.gifis cool but it doesn't look like any Unity I've used.
– WinEunuuchs2Unix
May 9 at 19:59
@WinEunuuchs2Unix Well that sucks. All right, thanks for your help anyways.
– Bobson Dugnutt
May 9 at 20:00
Is the super+w combination what you're looking for? ("super" is usually the key with Windows logo or equivalent.)
– pomsky
May 8 at 22:35
Is the super+w combination what you're looking for? ("super" is usually the key with Windows logo or equivalent.)
– pomsky
May 8 at 22:35
@pomsky Nope, sorry, I'd like to not use my mouse when changing between apps.
– Bobson Dugnutt
May 8 at 22:37
@pomsky Nope, sorry, I'd like to not use my mouse when changing between apps.
– Bobson Dugnutt
May 8 at 22:37
What about alt+key above tab?
– pomsky
May 9 at 10:17
What about alt+key above tab?
– pomsky
May 9 at 10:17
Your
.gif is cool but it doesn't look like any Unity I've used.– WinEunuuchs2Unix
May 9 at 19:59
Your
.gif is cool but it doesn't look like any Unity I've used.– WinEunuuchs2Unix
May 9 at 19:59
@WinEunuuchs2Unix Well that sucks. All right, thanks for your help anyways.
– Bobson Dugnutt
May 9 at 20:00
@WinEunuuchs2Unix Well that sucks. All right, thanks for your help anyways.
– Bobson Dugnutt
May 9 at 20:00
 |Â
show 2 more comments
2 Answers
2
active
oldest
votes
up vote
2
down vote
I looked at your link and honestly don't see how it is superior to Alt+Tab in Unity:
After the initial Alt+Tab if you keep holding down the Alt key and tap the the Tab key it cycles through Windows and those with two or more sub-windows lets you pick between them. I think this is superior to Windows 7 but perhaps I'm biased.
Make sure you are running Unity
For Ubuntu 16.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session --session=gnome
/usr/share/xsessions/ubuntu.desktop:Exec=gnome-session --session=ubuntu
For Ubuntu 18.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session
/usr/share/xsessions/gnome-xorg.desktop:Exec=gnome-session
/usr/share/xsessions/ubuntu-communitheme-snap.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu-communitheme /snap/communitheme/current/session
/usr/share/xsessions/ubuntu.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu gnome-session --session=ubuntu
/usr/share/xsessions/unity.desktop:Exec=/usr/lib/gnome-session/run-systemd-session unity-session.target
Notice the last line (far right side) shows: unity-session.target
answered May 9 at 1:39
WinEunuuchs2Unix
35.3k758132
Your illustration does look very nice (exactly what I'm looking for), but it looks nothing like mine. Mine consists of three panes which the windows cycles through.
– Bobson Dugnutt
May 9 at 10:39
@BobsonDugnutt Then that's possible usingWindows Key+R+Wand then using arrow keys or mouse to select which full window to pick from.
– WinEunuuchs2Unix
May 9 at 10:44
How can I configure my alt+tab to look like yours? What's the reason for the diffrenece? Are you using something newer than 16.04? You don't need the +R btw.
– Bobson Dugnutt
May 9 at 10:52
@BobsonDugnutt The.gifwas generated with 16.04. I just rebooted with 18.04 upgraded from a cloned image of 16.04 and Alt+Tab works the same way. You are right in 18.04 the +R isn't needed but it is in 16.04. I'm using Unity desktop in both 16.04 and 18.04
– WinEunuuchs2Unix
May 9 at 10:59
Do you know why it looks differently for me then?
– Bobson Dugnutt
May 9 at 11:04
 |Â
show 4 more comments
up vote
0
down vote
accepted
As per request, I'll add an answer.
In 'CompizConfig Settings Manager', I chose 'Ubuntu Unity Plugin', and under 'Switcher' enabled 'Key to start the Switcher'. I gave me a prompt saying that it conflicted with the "old" application switcher, which was apparently turned on, and I simply chose to disable the old switcher.
answered May 10 at 21:26
Bobson Dugnutt
1165
add a comment |Â
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
2
down vote
I looked at your link and honestly don't see how it is superior to Alt+Tab in Unity:
After the initial Alt+Tab if you keep holding down the Alt key and tap the the Tab key it cycles through Windows and those with two or more sub-windows lets you pick between them. I think this is superior to Windows 7 but perhaps I'm biased.
Make sure you are running Unity
For Ubuntu 16.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session --session=gnome
/usr/share/xsessions/ubuntu.desktop:Exec=gnome-session --session=ubuntu
For Ubuntu 18.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session
/usr/share/xsessions/gnome-xorg.desktop:Exec=gnome-session
/usr/share/xsessions/ubuntu-communitheme-snap.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu-communitheme /snap/communitheme/current/session
/usr/share/xsessions/ubuntu.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu gnome-session --session=ubuntu
/usr/share/xsessions/unity.desktop:Exec=/usr/lib/gnome-session/run-systemd-session unity-session.target
Notice the last line (far right side) shows: unity-session.target
answered May 9 at 1:39
WinEunuuchs2Unix
35.3k758132
Your illustration does look very nice (exactly what I'm looking for), but it looks nothing like mine. Mine consists of three panes which the windows cycles through.
– Bobson Dugnutt
May 9 at 10:39
@BobsonDugnutt Then that's possible usingWindows Key+R+Wand then using arrow keys or mouse to select which full window to pick from.
– WinEunuuchs2Unix
May 9 at 10:44
How can I configure my alt+tab to look like yours? What's the reason for the diffrenece? Are you using something newer than 16.04? You don't need the +R btw.
– Bobson Dugnutt
May 9 at 10:52
@BobsonDugnutt The.gifwas generated with 16.04. I just rebooted with 18.04 upgraded from a cloned image of 16.04 and Alt+Tab works the same way. You are right in 18.04 the +R isn't needed but it is in 16.04. I'm using Unity desktop in both 16.04 and 18.04
– WinEunuuchs2Unix
May 9 at 10:59
Do you know why it looks differently for me then?
– Bobson Dugnutt
May 9 at 11:04
 |Â
show 4 more comments
up vote
2
down vote
I looked at your link and honestly don't see how it is superior to Alt+Tab in Unity:
After the initial Alt+Tab if you keep holding down the Alt key and tap the the Tab key it cycles through Windows and those with two or more sub-windows lets you pick between them. I think this is superior to Windows 7 but perhaps I'm biased.
Make sure you are running Unity
For Ubuntu 16.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session --session=gnome
/usr/share/xsessions/ubuntu.desktop:Exec=gnome-session --session=ubuntu
For Ubuntu 18.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session
/usr/share/xsessions/gnome-xorg.desktop:Exec=gnome-session
/usr/share/xsessions/ubuntu-communitheme-snap.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu-communitheme /snap/communitheme/current/session
/usr/share/xsessions/ubuntu.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu gnome-session --session=ubuntu
/usr/share/xsessions/unity.desktop:Exec=/usr/lib/gnome-session/run-systemd-session unity-session.target
Notice the last line (far right side) shows: unity-session.target
answered May 9 at 1:39
WinEunuuchs2Unix
35.3k758132
Your illustration does look very nice (exactly what I'm looking for), but it looks nothing like mine. Mine consists of three panes which the windows cycles through.
– Bobson Dugnutt
May 9 at 10:39
@BobsonDugnutt Then that's possible usingWindows Key+R+Wand then using arrow keys or mouse to select which full window to pick from.
– WinEunuuchs2Unix
May 9 at 10:44
How can I configure my alt+tab to look like yours? What's the reason for the diffrenece? Are you using something newer than 16.04? You don't need the +R btw.
– Bobson Dugnutt
May 9 at 10:52
@BobsonDugnutt The.gifwas generated with 16.04. I just rebooted with 18.04 upgraded from a cloned image of 16.04 and Alt+Tab works the same way. You are right in 18.04 the +R isn't needed but it is in 16.04. I'm using Unity desktop in both 16.04 and 18.04
– WinEunuuchs2Unix
May 9 at 10:59
Do you know why it looks differently for me then?
– Bobson Dugnutt
May 9 at 11:04
 |Â
show 4 more comments
up vote
2
down vote
up vote
2
down vote
I looked at your link and honestly don't see how it is superior to Alt+Tab in Unity:
After the initial Alt+Tab if you keep holding down the Alt key and tap the the Tab key it cycles through Windows and those with two or more sub-windows lets you pick between them. I think this is superior to Windows 7 but perhaps I'm biased.
Make sure you are running Unity
For Ubuntu 16.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session --session=gnome
/usr/share/xsessions/ubuntu.desktop:Exec=gnome-session --session=ubuntu
For Ubuntu 18.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session
/usr/share/xsessions/gnome-xorg.desktop:Exec=gnome-session
/usr/share/xsessions/ubuntu-communitheme-snap.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu-communitheme /snap/communitheme/current/session
/usr/share/xsessions/ubuntu.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu gnome-session --session=ubuntu
/usr/share/xsessions/unity.desktop:Exec=/usr/lib/gnome-session/run-systemd-session unity-session.target
Notice the last line (far right side) shows: unity-session.target
answered May 9 at 1:39
WinEunuuchs2Unix
35.3k758132
I looked at your link and honestly don't see how it is superior to Alt+Tab in Unity:
After the initial Alt+Tab if you keep holding down the Alt key and tap the the Tab key it cycles through Windows and those with two or more sub-windows lets you pick between them. I think this is superior to Windows 7 but perhaps I'm biased.
Make sure you are running Unity
For Ubuntu 16.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session --session=gnome
/usr/share/xsessions/ubuntu.desktop:Exec=gnome-session --session=ubuntu
For Ubuntu 18.04 LTS:
$ grep "^Exec" /usr/share/xsessions/*
/usr/share/xsessions/gnome.desktop:Exec=gnome-session
/usr/share/xsessions/gnome-xorg.desktop:Exec=gnome-session
/usr/share/xsessions/ubuntu-communitheme-snap.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu-communitheme /snap/communitheme/current/session
/usr/share/xsessions/ubuntu.desktop:Exec=env GNOME_SHELL_SESSION_MODE=ubuntu gnome-session --session=ubuntu
/usr/share/xsessions/unity.desktop:Exec=/usr/lib/gnome-session/run-systemd-session unity-session.target
Notice the last line (far right side) shows: unity-session.target
answered May 9 at 1:39
WinEunuuchs2Unix
35.3k758132
edited May 10 at 0:40
answered May 9 at 1:39
WinEunuuchs2Unix
35.3k758132
answered May 9 at 1:39
WinEunuuchs2Unix
35.3k758132
answered May 9 at 1:39
WinEunuuchs2Unix
35.3k758132
35.3k758132
Your illustration does look very nice (exactly what I'm looking for), but it looks nothing like mine. Mine consists of three panes which the windows cycles through.
– Bobson Dugnutt
May 9 at 10:39
@BobsonDugnutt Then that's possible usingWindows Key+R+Wand then using arrow keys or mouse to select which full window to pick from.
– WinEunuuchs2Unix
May 9 at 10:44
How can I configure my alt+tab to look like yours? What's the reason for the diffrenece? Are you using something newer than 16.04? You don't need the +R btw.
– Bobson Dugnutt
May 9 at 10:52
@BobsonDugnutt The.gifwas generated with 16.04. I just rebooted with 18.04 upgraded from a cloned image of 16.04 and Alt+Tab works the same way. You are right in 18.04 the +R isn't needed but it is in 16.04. I'm using Unity desktop in both 16.04 and 18.04
– WinEunuuchs2Unix
May 9 at 10:59
Do you know why it looks differently for me then?
– Bobson Dugnutt
May 9 at 11:04
 |Â
show 4 more comments
Your illustration does look very nice (exactly what I'm looking for), but it looks nothing like mine. Mine consists of three panes which the windows cycles through.
– Bobson Dugnutt
May 9 at 10:39
@BobsonDugnutt Then that's possible usingWindows Key+R+Wand then using arrow keys or mouse to select which full window to pick from.
– WinEunuuchs2Unix
May 9 at 10:44
How can I configure my alt+tab to look like yours? What's the reason for the diffrenece? Are you using something newer than 16.04? You don't need the +R btw.
– Bobson Dugnutt
May 9 at 10:52
@BobsonDugnutt The.gifwas generated with 16.04. I just rebooted with 18.04 upgraded from a cloned image of 16.04 and Alt+Tab works the same way. You are right in 18.04 the +R isn't needed but it is in 16.04. I'm using Unity desktop in both 16.04 and 18.04
– WinEunuuchs2Unix
May 9 at 10:59
Do you know why it looks differently for me then?
– Bobson Dugnutt
May 9 at 11:04
Your illustration does look very nice (exactly what I'm looking for), but it looks nothing like mine. Mine consists of three panes which the windows cycles through.
– Bobson Dugnutt
May 9 at 10:39
Your illustration does look very nice (exactly what I'm looking for), but it looks nothing like mine. Mine consists of three panes which the windows cycles through.
– Bobson Dugnutt
May 9 at 10:39
@BobsonDugnutt Then that's possible using
Windows Key+R+W and then using arrow keys or mouse to select which full window to pick from.– WinEunuuchs2Unix
May 9 at 10:44
@BobsonDugnutt Then that's possible using
Windows Key+R+W and then using arrow keys or mouse to select which full window to pick from.– WinEunuuchs2Unix
May 9 at 10:44
How can I configure my alt+tab to look like yours? What's the reason for the diffrenece? Are you using something newer than 16.04? You don't need the +R btw.
– Bobson Dugnutt
May 9 at 10:52
How can I configure my alt+tab to look like yours? What's the reason for the diffrenece? Are you using something newer than 16.04? You don't need the +R btw.
– Bobson Dugnutt
May 9 at 10:52
@BobsonDugnutt The
.gif was generated with 16.04. I just rebooted with 18.04 upgraded from a cloned image of 16.04 and Alt+Tab works the same way. You are right in 18.04 the +R isn't needed but it is in 16.04. I'm using Unity desktop in both 16.04 and 18.04– WinEunuuchs2Unix
May 9 at 10:59
@BobsonDugnutt The
.gif was generated with 16.04. I just rebooted with 18.04 upgraded from a cloned image of 16.04 and Alt+Tab works the same way. You are right in 18.04 the +R isn't needed but it is in 16.04. I'm using Unity desktop in both 16.04 and 18.04– WinEunuuchs2Unix
May 9 at 10:59
Do you know why it looks differently for me then?
– Bobson Dugnutt
May 9 at 11:04
Do you know why it looks differently for me then?
– Bobson Dugnutt
May 9 at 11:04
 |Â
show 4 more comments
up vote
0
down vote
accepted
As per request, I'll add an answer.
In 'CompizConfig Settings Manager', I chose 'Ubuntu Unity Plugin', and under 'Switcher' enabled 'Key to start the Switcher'. I gave me a prompt saying that it conflicted with the "old" application switcher, which was apparently turned on, and I simply chose to disable the old switcher.
answered May 10 at 21:26
Bobson Dugnutt
1165
add a comment |Â
up vote
0
down vote
accepted
As per request, I'll add an answer.
In 'CompizConfig Settings Manager', I chose 'Ubuntu Unity Plugin', and under 'Switcher' enabled 'Key to start the Switcher'. I gave me a prompt saying that it conflicted with the "old" application switcher, which was apparently turned on, and I simply chose to disable the old switcher.
answered May 10 at 21:26
Bobson Dugnutt
1165
add a comment |Â
up vote
0
down vote
accepted
up vote
0
down vote
accepted
As per request, I'll add an answer.
In 'CompizConfig Settings Manager', I chose 'Ubuntu Unity Plugin', and under 'Switcher' enabled 'Key to start the Switcher'. I gave me a prompt saying that it conflicted with the "old" application switcher, which was apparently turned on, and I simply chose to disable the old switcher.
answered May 10 at 21:26
Bobson Dugnutt
1165
As per request, I'll add an answer.
In 'CompizConfig Settings Manager', I chose 'Ubuntu Unity Plugin', and under 'Switcher' enabled 'Key to start the Switcher'. I gave me a prompt saying that it conflicted with the "old" application switcher, which was apparently turned on, and I simply chose to disable the old switcher.
answered May 10 at 21:26
Bobson Dugnutt
1165
answered May 10 at 21:26
Bobson Dugnutt
1165
answered May 10 at 21:26
Bobson Dugnutt
1165
answered May 10 at 21:26
Bobson Dugnutt
1165
1165
add a comment |Â
add a comment |Â
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1033791%2fsomething-similar-to-gnomes-alternatetab-on-unity%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Is the super+w combination what you're looking for? ("super" is usually the key with Windows logo or equivalent.)
– pomsky
May 8 at 22:35
@pomsky Nope, sorry, I'd like to not use my mouse when changing between apps.
– Bobson Dugnutt
May 8 at 22:37
What about alt+key above tab?
– pomsky
May 9 at 10:17
Your
.gifis cool but it doesn't look like any Unity I've used.– WinEunuuchs2Unix
May 9 at 19:59
@WinEunuuchs2Unix Well that sucks. All right, thanks for your help anyways.
– Bobson Dugnutt
May 9 at 20:00