No Wi-Fi adapter found on a HP 240 G6 [duplicate]

The name of the pictureThe name of the pictureThe name of the pictureClash Royale CLAN TAG#URR8PPP








up vote
0
down vote

favorite













This question already has an answer here:



  • Realtek Semiconductor RTL8723DE Device d723 issue

    2 answers



  • How do I install ndiswrapper support for an unsupported RTL8723DE wireless module? [duplicate]

    1 answer



I installed Ubuntu 17.10 on my computer a few days ago, but I've been unable to make my Wi-Fi work. I've tried many guides through the internet, but none have worked. Both Windows 10 and Ubuntu are installed on my pc, but Secure Boot has been disabled. I do have internet connection through USB. I've reinstalled Ubuntu a few times.
If its of any use, these is the output of lshw -C network



 *-network 
 description: Ethernet interface
 product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
 vendor: Realtek Semiconductor Co., Ltd.
 physical id: 0
 bus info: pci@0000:02:00.0
 logical name: eno1
 version: 15
 serial: f4:30:b9:ae:69:2d
 size: 10Mbit/s
 capacity: 1Gbit/s
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
 configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.045.08-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair speed=10Mbit/s
 resources: irq:127 ioport:4000(size=256) memory:b1104000-b1104fff memory:b1100000-b1103fff

 *-network UNCLAIMED
 description: Network controller
 product: Realtek Semiconductor Co., Ltd.
 vendor: Realtek Semiconductor Co., Ltd.
 physical id: 0
 bus info: pci@0000:03:00.0
 version: 00
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress cap_list
 configuration: latency=0
 resources: ioport:3000(size=256) memory:b1000000-b100ffff
 *-network


 description: Ethernet interface
 physical id: 3
 logical name: enp0s20f0u1
 serial: 16:48:22:be:13:40
 capabilities: ethernet physical
 configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.9 link=yes multicast=yes


The output for lspci is



 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 08)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device d723


and the output for lspci -nnk | grep 0280



03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:d723]





networking drivers wireless realtek-wireless







share|improve this question















marked as duplicate by pomsky, chili555 networking
Users with the  networking badge can single-handedly close networking questions as duplicates and reopen them as needed.

StackExchange.ready(function()
if (StackExchange.options.isMobile) return;

$('.dupe-hammer-message-hover:not(.hover-bound)').each(function()
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');

$hover.hover(
function()
$hover.showInfoMessage('',
messageElement: $msg.clone().show(),
transient: false,
position: my: 'bottom left', at: 'top center', offsetTop: -7 ,
dismissable: false,
relativeToBody: true
);
,
function()
StackExchange.helpers.removeMessages();

);
);
);
 Mar 14 at 1:11


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.














  • Even better: lspci -nnk | grep 0280
    – chili555
    Mar 14 at 0:23










  • I've added both of them to the main post
    – Jizzycorn
    Mar 14 at 0:45










  • Followed the instructions there, but after reboot theres still no adapter found
    – Jizzycorn
    Mar 14 at 0:58










  • Please also do: sudo dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414 and reboot.
    – chili555
    Mar 14 at 1:07










  • I love you in ways that should not be possible
    – Jizzycorn
    Mar 14 at 1:15














up vote
0
down vote

favorite













This question already has an answer here:



  • Realtek Semiconductor RTL8723DE Device d723 issue

    2 answers



  • How do I install ndiswrapper support for an unsupported RTL8723DE wireless module? [duplicate]

    1 answer



I installed Ubuntu 17.10 on my computer a few days ago, but I've been unable to make my Wi-Fi work. I've tried many guides through the internet, but none have worked. Both Windows 10 and Ubuntu are installed on my pc, but Secure Boot has been disabled. I do have internet connection through USB. I've reinstalled Ubuntu a few times.
If its of any use, these is the output of lshw -C network



 *-network 
 description: Ethernet interface
 product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
 vendor: Realtek Semiconductor Co., Ltd.
 physical id: 0
 bus info: pci@0000:02:00.0
 logical name: eno1
 version: 15
 serial: f4:30:b9:ae:69:2d
 size: 10Mbit/s
 capacity: 1Gbit/s
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
 configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.045.08-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair speed=10Mbit/s
 resources: irq:127 ioport:4000(size=256) memory:b1104000-b1104fff memory:b1100000-b1103fff

 *-network UNCLAIMED
 description: Network controller
 product: Realtek Semiconductor Co., Ltd.
 vendor: Realtek Semiconductor Co., Ltd.
 physical id: 0
 bus info: pci@0000:03:00.0
 version: 00
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress cap_list
 configuration: latency=0
 resources: ioport:3000(size=256) memory:b1000000-b100ffff
 *-network


 description: Ethernet interface
 physical id: 3
 logical name: enp0s20f0u1
 serial: 16:48:22:be:13:40
 capabilities: ethernet physical
 configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.9 link=yes multicast=yes


The output for lspci is



 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 08)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device d723


and the output for lspci -nnk | grep 0280



03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:d723]





networking drivers wireless realtek-wireless







share|improve this question















marked as duplicate by pomsky, chili555 networking
Users with the  networking badge can single-handedly close networking questions as duplicates and reopen them as needed.

StackExchange.ready(function()
if (StackExchange.options.isMobile) return;

$('.dupe-hammer-message-hover:not(.hover-bound)').each(function()
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');

$hover.hover(
function()
$hover.showInfoMessage('',
messageElement: $msg.clone().show(),
transient: false,
position: my: 'bottom left', at: 'top center', offsetTop: -7 ,
dismissable: false,
relativeToBody: true
);
,
function()
StackExchange.helpers.removeMessages();

);
);
);
 Mar 14 at 1:11


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.














  • Even better: lspci -nnk | grep 0280
    – chili555
    Mar 14 at 0:23










  • I've added both of them to the main post
    – Jizzycorn
    Mar 14 at 0:45










  • Followed the instructions there, but after reboot theres still no adapter found
    – Jizzycorn
    Mar 14 at 0:58










  • Please also do: sudo dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414 and reboot.
    – chili555
    Mar 14 at 1:07










  • I love you in ways that should not be possible
    – Jizzycorn
    Mar 14 at 1:15












up vote
0
down vote

favorite









up vote
0
down vote

favorite












This question already has an answer here:



  • Realtek Semiconductor RTL8723DE Device d723 issue

    2 answers



  • How do I install ndiswrapper support for an unsupported RTL8723DE wireless module? [duplicate]

    1 answer



I installed Ubuntu 17.10 on my computer a few days ago, but I've been unable to make my Wi-Fi work. I've tried many guides through the internet, but none have worked. Both Windows 10 and Ubuntu are installed on my pc, but Secure Boot has been disabled. I do have internet connection through USB. I've reinstalled Ubuntu a few times.
If its of any use, these is the output of lshw -C network



 *-network 
 description: Ethernet interface
 product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
 vendor: Realtek Semiconductor Co., Ltd.
 physical id: 0
 bus info: pci@0000:02:00.0
 logical name: eno1
 version: 15
 serial: f4:30:b9:ae:69:2d
 size: 10Mbit/s
 capacity: 1Gbit/s
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
 configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.045.08-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair speed=10Mbit/s
 resources: irq:127 ioport:4000(size=256) memory:b1104000-b1104fff memory:b1100000-b1103fff

 *-network UNCLAIMED
 description: Network controller
 product: Realtek Semiconductor Co., Ltd.
 vendor: Realtek Semiconductor Co., Ltd.
 physical id: 0
 bus info: pci@0000:03:00.0
 version: 00
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress cap_list
 configuration: latency=0
 resources: ioport:3000(size=256) memory:b1000000-b100ffff
 *-network


 description: Ethernet interface
 physical id: 3
 logical name: enp0s20f0u1
 serial: 16:48:22:be:13:40
 capabilities: ethernet physical
 configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.9 link=yes multicast=yes


The output for lspci is



 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 08)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device d723


and the output for lspci -nnk | grep 0280



03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:d723]





networking drivers wireless realtek-wireless







share|improve this question
















This question already has an answer here:



  • Realtek Semiconductor RTL8723DE Device d723 issue

    2 answers



  • How do I install ndiswrapper support for an unsupported RTL8723DE wireless module? [duplicate]

    1 answer



I installed Ubuntu 17.10 on my computer a few days ago, but I've been unable to make my Wi-Fi work. I've tried many guides through the internet, but none have worked. Both Windows 10 and Ubuntu are installed on my pc, but Secure Boot has been disabled. I do have internet connection through USB. I've reinstalled Ubuntu a few times.
If its of any use, these is the output of lshw -C network



 *-network 
 description: Ethernet interface
 product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
 vendor: Realtek Semiconductor Co., Ltd.
 physical id: 0
 bus info: pci@0000:02:00.0
 logical name: eno1
 version: 15
 serial: f4:30:b9:ae:69:2d
 size: 10Mbit/s
 capacity: 1Gbit/s
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
 configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.045.08-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair speed=10Mbit/s
 resources: irq:127 ioport:4000(size=256) memory:b1104000-b1104fff memory:b1100000-b1103fff

 *-network UNCLAIMED
 description: Network controller
 product: Realtek Semiconductor Co., Ltd.
 vendor: Realtek Semiconductor Co., Ltd.
 physical id: 0
 bus info: pci@0000:03:00.0
 version: 00
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress cap_list
 configuration: latency=0
 resources: ioport:3000(size=256) memory:b1000000-b100ffff
 *-network


 description: Ethernet interface
 physical id: 3
 logical name: enp0s20f0u1
 serial: 16:48:22:be:13:40
 capabilities: ethernet physical
 configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.9 link=yes multicast=yes


The output for lspci is



 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 08)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device d723


and the output for lspci -nnk | grep 0280



03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:d723]




This question already has an answer here:



  • Realtek Semiconductor RTL8723DE Device d723 issue

    2 answers



  • How do I install ndiswrapper support for an unsupported RTL8723DE wireless module? [duplicate]

    1 answer






networking drivers wireless realtek-wireless




networking drivers wireless realtek-wireless






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Mar 14 at 0:59

























asked Mar 14 at 0:13









Jizzycorn

12




12




marked as duplicate by pomsky, chili555 networking
Users with the  networking badge can single-handedly close networking questions as duplicates and reopen them as needed.

StackExchange.ready(function()
if (StackExchange.options.isMobile) return;

$('.dupe-hammer-message-hover:not(.hover-bound)').each(function()
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');

$hover.hover(
function()
$hover.showInfoMessage('',
messageElement: $msg.clone().show(),
transient: false,
position: my: 'bottom left', at: 'top center', offsetTop: -7 ,
dismissable: false,
relativeToBody: true
);
,
function()
StackExchange.helpers.removeMessages();

);
);
);
 Mar 14 at 1:11


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.






marked as duplicate by pomsky, chili555 networking
Users with the  networking badge can single-handedly close networking questions as duplicates and reopen them as needed.

StackExchange.ready(function()
if (StackExchange.options.isMobile) return;

$('.dupe-hammer-message-hover:not(.hover-bound)').each(function()
var $hover = $(this).addClass('hover-bound'),
$msg = $hover.siblings('.dupe-hammer-message');

$hover.hover(
function()
$hover.showInfoMessage('',
messageElement: $msg.clone().show(),
transient: false,
position: my: 'bottom left', at: 'top center', offsetTop: -7 ,
dismissable: false,
relativeToBody: true
);
,
function()
StackExchange.helpers.removeMessages();

);
);
);
 Mar 14 at 1:11


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.













  • Even better: lspci -nnk | grep 0280
    – chili555
    Mar 14 at 0:23










  • I've added both of them to the main post
    – Jizzycorn
    Mar 14 at 0:45










  • Followed the instructions there, but after reboot theres still no adapter found
    – Jizzycorn
    Mar 14 at 0:58










  • Please also do: sudo dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414 and reboot.
    – chili555
    Mar 14 at 1:07










  • I love you in ways that should not be possible
    – Jizzycorn
    Mar 14 at 1:15
















  • Even better: lspci -nnk | grep 0280
    – chili555
    Mar 14 at 0:23










  • I've added both of them to the main post
    – Jizzycorn
    Mar 14 at 0:45










  • Followed the instructions there, but after reboot theres still no adapter found
    – Jizzycorn
    Mar 14 at 0:58










  • Please also do: sudo dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414 and reboot.
    – chili555
    Mar 14 at 1:07










  • I love you in ways that should not be possible
    – Jizzycorn
    Mar 14 at 1:15















Even better: lspci -nnk | grep 0280
– chili555
Mar 14 at 0:23




Even better: lspci -nnk | grep 0280
– chili555
Mar 14 at 0:23












I've added both of them to the main post
– Jizzycorn
Mar 14 at 0:45




I've added both of them to the main post
– Jizzycorn
Mar 14 at 0:45












Followed the instructions there, but after reboot theres still no adapter found
– Jizzycorn
Mar 14 at 0:58




Followed the instructions there, but after reboot theres still no adapter found
– Jizzycorn
Mar 14 at 0:58












Please also do: sudo dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414 and reboot.
– chili555
Mar 14 at 1:07




Please also do: sudo dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414 and reboot.
– chili555
Mar 14 at 1:07












I love you in ways that should not be possible
– Jizzycorn
Mar 14 at 1:15




I love you in ways that should not be possible
– Jizzycorn
Mar 14 at 1:15















active

oldest

votes






















active

oldest

votes













active

oldest

votes









active

oldest

votes






active

oldest

votes
-

Popular posts from this blog

GRUB: Fatal! inconsistent data read from (0x84) 0+xxxxxx

Image
Clash Royale CLAN TAG #URR8PPP up vote 1 down vote favorite Can anybody help me with this messages at (before) grub starts booting? . . Fatal! inconsistent data read from (0x84) 0+xxxxxx . Fatal! inconsistent data read from (0x84) n+yyyyyy . (hd0,4) This is running in dual boot with windows 7. Both Windows and Ubuntu are running flawlessly, except for this "errors" list. boot grub2 share | improve this question edited Apr 8 at 12:59 Byte Commander 59.4k 26 159 267 asked Apr 8 at 12:56 Viciente 6 1 add a comment  |  up vote 1 down vote favorite Can anybody help me with this messages at (before) grub starts booting? . . Fatal! inconsistent data read from (0x84) 0+xxxxxx . Fatal! inconsistent data read from (0x84) n+yyyyyy . (hd0,4) This is running in dual boot with windows 7. Both Windows and Ubuntu are running flawlessly, except for this "errors" list. boot grub2 share | improve th...
Read more

Do not install recommended packages of dependencies

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite Recommended packages of a package and recommended packages of it's dependencies are installed by default when installing a package (tested on Ubuntu 18.04 Beta). How to install recommended packages of a package, but skip recommended packages of it's dependencies by a single apt command? apt software-installation dependencies share | improve this question asked Apr 24 at 6:37 linuxbuild 191 6 2 The --(no-)install-recommends,suggests flags are set for the entire apt operation, so your best bet would be (a) either installing without recommends and then installing the recommends, or (b) parsing out the recommends and installing them explicitl. Both are covered in ... – muru Apr 24 at 6:49 3 Possible duplicate of How to --install-suggests on an already installed package? – muru Apr 24 at 6:49 2 (It m...
Read more

What makes Checkinstall packages not suitable for distribution?

Image
Clash Royale CLAN TAG #URR8PPP up vote 2 down vote favorite I am planning to have multiple servers running with the same packages. And as a solution to not compile packages individually on each server, I want to use checkinstall to generate .deb and then distribute it via private repository. However, in the linked guide it says that it is not designed to produce packages suitable for distribution My questions are: What is different about this packaging, that makes it not suitable for distribution? Or what should be in the package, to make it suitable? Could there be any issues with using checkinstall and distributing packages to ~20 servers? Any advice or links where I can find out more appreciated. Thanks! apt package-management packaging checkinstall share | improve this question asked Feb 6 at 13:56 Ilya 123 5 add a comment  |  up vote 2 down vote favorite I am planning to have multiple servers runni...
Read more