Help ethernet problem disappears when I restart or suspend my laptop
Clash Royale CLAN TAG#URR8PPP up vote
0
down vote
favorite
I would like you to help me. I had this problem that when I restart or suspend my laptop, the ethernet connection disappears completely. And what is available is the wifi when restarting the ethernet is enabled then restart is disabled is somewhat stressful and because the connection to ethernet is much faster.
I have a toshiba laptop brand A665-S6100X has a ssd intel of 256 and a hard drive 8gb ram ddr3 1333
It has happened to me also with ubuntu 16.04
It does not happen to me with windows when I had it installed but if here it could be
I hope you can help me.
networking suspend laptop ethernet
asked Feb 25 at 0:05
Omar Cuba
1
add a comment |Â
up vote
0
down vote
favorite
I would like you to help me. I had this problem that when I restart or suspend my laptop, the ethernet connection disappears completely. And what is available is the wifi when restarting the ethernet is enabled then restart is disabled is somewhat stressful and because the connection to ethernet is much faster.
I have a toshiba laptop brand A665-S6100X has a ssd intel of 256 and a hard drive 8gb ram ddr3 1333
It has happened to me also with ubuntu 16.04
It does not happen to me with windows when I had it installed but if here it could be
I hope you can help me.
networking suspend laptop ethernet
asked Feb 25 at 0:05
Omar Cuba
1
1
Your question tells us about your SSD, your HDD, your RAM and your RAM speed but it doesn't tell us about your WiFi or Ethernet. Please open a terminal by pressingCtrl+Alt+Tkeys at the same time. Then typesudo lshw -class network. Using your mouse highlight the last line and pull the mouse up to highlight all text up to the command. Then right click with your mouse and selectcopy. Then edit your question above and right click with the mouse and selectpasteto put the terminal output into your question. Then highlight the newly inserted text in your question and click the.
– WinEunuuchs2Unix
Feb 25 at 0:15
add a comment |Â
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I would like you to help me. I had this problem that when I restart or suspend my laptop, the ethernet connection disappears completely. And what is available is the wifi when restarting the ethernet is enabled then restart is disabled is somewhat stressful and because the connection to ethernet is much faster.
I have a toshiba laptop brand A665-S6100X has a ssd intel of 256 and a hard drive 8gb ram ddr3 1333
It has happened to me also with ubuntu 16.04
It does not happen to me with windows when I had it installed but if here it could be
I hope you can help me.
networking suspend laptop ethernet
asked Feb 25 at 0:05
Omar Cuba
1
I would like you to help me. I had this problem that when I restart or suspend my laptop, the ethernet connection disappears completely. And what is available is the wifi when restarting the ethernet is enabled then restart is disabled is somewhat stressful and because the connection to ethernet is much faster.
I have a toshiba laptop brand A665-S6100X has a ssd intel of 256 and a hard drive 8gb ram ddr3 1333
It has happened to me also with ubuntu 16.04
It does not happen to me with windows when I had it installed but if here it could be
I hope you can help me.
networking suspend laptop ethernet
networking suspend laptop ethernet
asked Feb 25 at 0:05
Omar Cuba
1
asked Feb 25 at 0:05
Omar Cuba
1
asked Feb 25 at 0:05
Omar Cuba
1
asked Feb 25 at 0:05
Omar Cuba
1
asked Feb 25 at 0:05
Omar Cuba
1
1
1
Your question tells us about your SSD, your HDD, your RAM and your RAM speed but it doesn't tell us about your WiFi or Ethernet. Please open a terminal by pressingCtrl+Alt+Tkeys at the same time. Then typesudo lshw -class network. Using your mouse highlight the last line and pull the mouse up to highlight all text up to the command. Then right click with your mouse and selectcopy. Then edit your question above and right click with the mouse and selectpasteto put the terminal output into your question. Then highlight the newly inserted text in your question and click the.
– WinEunuuchs2Unix
Feb 25 at 0:15
add a comment |Â
1
Your question tells us about your SSD, your HDD, your RAM and your RAM speed but it doesn't tell us about your WiFi or Ethernet. Please open a terminal by pressingCtrl+Alt+Tkeys at the same time. Then typesudo lshw -class network. Using your mouse highlight the last line and pull the mouse up to highlight all text up to the command. Then right click with your mouse and selectcopy. Then edit your question above and right click with the mouse and selectpasteto put the terminal output into your question. Then highlight the newly inserted text in your question and click the.
– WinEunuuchs2Unix
Feb 25 at 0:15
1
1
Your question tells us about your SSD, your HDD, your RAM and your RAM speed but it doesn't tell us about your WiFi or Ethernet. Please open a terminal by pressing
Ctrl+Alt+T keys at the same time. Then type sudo lshw -class network. Using your mouse highlight the last line and pull the mouse up to highlight all text up to the command. Then right click with your mouse and select copy. Then edit your question above and right click with the mouse and select paste to put the terminal output into your question. Then highlight the newly inserted text in your question and click the – WinEunuuchs2Unix
Feb 25 at 0:15
Your question tells us about your SSD, your HDD, your RAM and your RAM speed but it doesn't tell us about your WiFi or Ethernet. Please open a terminal by pressing
Ctrl+Alt+T keys at the same time. Then type sudo lshw -class network. Using your mouse highlight the last line and pull the mouse up to highlight all text up to the command. Then right click with your mouse and select copy. Then edit your question above and right click with the mouse and select paste to put the terminal output into your question. Then highlight the newly inserted text in your question and click the – WinEunuuchs2Unix
Feb 25 at 0:15
add a comment |Â
1 Answer
1
active
oldest
votes
up vote
0
down vote
*-network
descripción: Ethernet interface
producto: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
fabricante: Realtek Semiconductor Co., Ltd.
id fÃÂsico: 0
información del bus: pci@0000:01:00.0
nombre lógico: enp1s0
versión: 05
serie: b8:70:f4:57:26:e1
tamaño: 100Mbit/s
capacidad: 100Mbit/s
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.1.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
recursos: irq:33 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
-------------------------
After suspend or reboot
-------------------------
sudo lshw -class network
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
answered Feb 26 at 5:15
Omar Cuba
1
add a comment |Â
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
*-network
descripción: Ethernet interface
producto: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
fabricante: Realtek Semiconductor Co., Ltd.
id fÃÂsico: 0
información del bus: pci@0000:01:00.0
nombre lógico: enp1s0
versión: 05
serie: b8:70:f4:57:26:e1
tamaño: 100Mbit/s
capacidad: 100Mbit/s
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.1.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
recursos: irq:33 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
-------------------------
After suspend or reboot
-------------------------
sudo lshw -class network
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
answered Feb 26 at 5:15
Omar Cuba
1
add a comment |Â
up vote
0
down vote
*-network
descripción: Ethernet interface
producto: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
fabricante: Realtek Semiconductor Co., Ltd.
id fÃÂsico: 0
información del bus: pci@0000:01:00.0
nombre lógico: enp1s0
versión: 05
serie: b8:70:f4:57:26:e1
tamaño: 100Mbit/s
capacidad: 100Mbit/s
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.1.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
recursos: irq:33 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
-------------------------
After suspend or reboot
-------------------------
sudo lshw -class network
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
answered Feb 26 at 5:15
Omar Cuba
1
add a comment |Â
up vote
0
down vote
up vote
0
down vote
*-network
descripción: Ethernet interface
producto: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
fabricante: Realtek Semiconductor Co., Ltd.
id fÃÂsico: 0
información del bus: pci@0000:01:00.0
nombre lógico: enp1s0
versión: 05
serie: b8:70:f4:57:26:e1
tamaño: 100Mbit/s
capacidad: 100Mbit/s
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.1.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
recursos: irq:33 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
-------------------------
After suspend or reboot
-------------------------
sudo lshw -class network
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
answered Feb 26 at 5:15
Omar Cuba
1
*-network
descripción: Ethernet interface
producto: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
fabricante: Realtek Semiconductor Co., Ltd.
id fÃÂsico: 0
información del bus: pci@0000:01:00.0
nombre lógico: enp1s0
versión: 05
serie: b8:70:f4:57:26:e1
tamaño: 100Mbit/s
capacidad: 100Mbit/s
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.1.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
recursos: irq:33 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
-------------------------
After suspend or reboot
-------------------------
sudo lshw -class network
*-network
descripción: Interfaz inalámbrica
producto: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
fabricante: Intel Corporation
id fÃÂsico: 0
información del bus: pci@0000:02:00.0
nombre lógico: wlp2s0
versión: 5f
serie: 64:80:99:24:8b:80
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuración: broadcast=yes driver=iwlwifi driverversion=4.13.0-36-generic firmware=41.28.5.1 build 33926 ip=192.168.1.104 latency=0 link=yes multicast=yes wireless=IEEE 802.11
recursos: irq:36 memoria:f7e00000-f7e01fff
*-network DESACTIVADO
descripción: Ethernet interface
id fÃÂsico: 4
nombre lógico: enx64d4da28f12d
serie: 64:d4:da:28:f1:2d
capacidades: ethernet physical
configuración: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
answered Feb 26 at 5:15
Omar Cuba
1
answered Feb 26 at 5:15
Omar Cuba
1
answered Feb 26 at 5:15
Omar Cuba
1
answered Feb 26 at 5:15
Omar Cuba
1
1
add a comment |Â
add a comment |Â
Â
draft saved
draft discarded
Â
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1009474%2fhelp-ethernet-problem-disappears-when-i-restart-or-suspend-my-laptop%23new-answer', 'question_page');
);
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
var $window = $(window),
onScroll = function(e)
var $elem = $('.new-login-left'),
docViewTop = $window.scrollTop(),
docViewBottom = docViewTop + $window.height(),
elemTop = $elem.offset().top,
elemBottom = elemTop + $elem.height();
if ((docViewTop elemBottom))
StackExchange.using('gps', function() StackExchange.gps.track('embedded_signup_form.view', location: 'question_page' ); );
$window.unbind('scroll', onScroll);
;
$window.on('scroll', onScroll);
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
1
Your question tells us about your SSD, your HDD, your RAM and your RAM speed but it doesn't tell us about your WiFi or Ethernet. Please open a terminal by pressing
Ctrl+Alt+Tkeys at the same time. Then typesudo lshw -class network. Using your mouse highlight the last line and pull the mouse up to highlight all text up to the command. Then right click with your mouse and selectcopy. Then edit your question above and right click with the mouse and selectpasteto put the terminal output into your question. Then highlight the newly inserted text in your question and click the.– WinEunuuchs2Unix
Feb 25 at 0:15